My 360

My 360 is just a little hop-up of a 360 for my 72 F100

It has:

• A Crane 272 Maximum Velocity Hydraulic Cam 272/284 .533/.563 218/224@.05

• Cast Pistons with what appears to be a stock 8:1 compression-- I intended to have 10:1 but I guess that didn't happen but if I had a 390 crank and rods it would have been 10:1

• Stock 360 Rods with Milidon/ARP rod bolts

• D2TE-AA heads which I ported on the intake and exhaust

• Offenhauser Hi-Rise single quad 360 degree intake

• Holley 700 CFM Double Pumper

• Stock replacement adjustable rocker arms

• Stock 1971 360 Block bored .04 over

• Stock Cast crank turned .01 under on rods and mains

• I only did one real block oiling improvement and tht was to open up the oil passage to the main bearings

• Hedman Headers

• Dual 3" Flowmaster with 4' 3"dia. pipes behind the "flow's" that necks down to 2.5inch pipes exiting infront of the rear wheels

• Mallory Unilite Vacuum advance distributor

360 pics