We offer a complete line of cutterheads and cutter drives ranging from 10 to 1250 horsepower to suit virtually any dredging application.
We can supply a cutterhead for your existing cutter drive, or we can design a new cutter drive to help increase the production of your dredge.
 |
 |
 |
|
|
We have a large variety of cutter styles  |
|
STANDARD REPLACEABLE EDGE CUTTERHEADS - LEFT HAND ROTATION
Our standard replaceable edge cutter heads offer superior cutting performance in most dredging applications including: clay, mud, sand, and gravel. Cast steel blades and edges offer superior wear life and good weldability for easy hardfacing and rebuilding of cutterheads.
For more aggressive digging performance in hard and compacted materials, we can outfit all of our cutters with pin-on replaceable teeth. We use pin-on replaceable teeth (like those used on loader and backhoe buckets) for a large variety of tooth styles and sizes. Please inquire with the factory about pin-on, replaceable cutter teeth.
| BACK RING INSIDE DIAMETER | NUMBER OF BLADES | EDGE STYLE | SET-UP HEIGHT | HUB LENGTH | BORE | KEY WAY | TAPER PER FOOT |
| 26" | 6 | OFFSET SERRATED | 13" | 6" | 3" | 3/4" x 3/8" | 3/4" |
| 31 1/2" | 6 | OFFSET SERRATED | 18 1/2" | 8 3/4" | 3 3/4" 5" | 7/8"x7/16"1 1/4" x 5/8" | 3/4" |
| 38" | 5 | OFFSET SERRATED | 18" | 8 3/4" | 3 3/4" 5" | 7/8"x7/16"1 1/4" x 5/8" | 3/4" |
| 38 | 6 | OFFSET SERRATED | 18" | 8 3/4" | 3 3/4" 5" | 7/8"x7/16"1 1/4" x 5/8" | 3/4" |
| 43 | 6 | OFFSET SERRATED | 23" | 8 3/4" | 5" | 1 1/4" x 5/8" | 3/4" |
| 43 | 6 | PLAIN | 23" | 8 3/4" | 5" | 1 1/4" x 5/8" | 3/4" |
 |
This page © Copyright 1998-2003, DredgeMasters International, Inc.
DredgeMasters International, Inc.,
200 Center Point Road
South
Hendersonville, TN 37075 USA
Phone (615) 822-3500
Fax (615)
822-0002
email:
dmidredge@aol.com