The equipment company run by people who run dogs... |
Send us an email at: jetsetset@aol.com
|
WEAVE POLES |
|
|
SINGLE BASE 12 POLE DESIGN WITH CROSS LEGS |
||
|
x 2 piece base |
$160.00 |
||
|
x 3 piece base |
$175.00 |
||
|
x single pole add on base |
$15.00 |
||
|
12 TRAINING GATES |
$110.00 |
||
|
2' x 3' with weighted bottoms so they can't tip
over. Constructed of 3/8" steel
rod with metal feet and |
|||
|
TRAINING AND COMPETITION (12 POLES) |
$400.00 |
||
|
This system folds up to fit into the trunk of a sedan. 21" x 36" total size when base is completely retracted. No tools needed to set up or adjust. Poles stay at 90º to base but the side to side clearance of the poles can be adjusted. The dog can walk straight thru a large channel which can gradually be decreased until the dog is weaving with the base completely straight. |
|||
|
STAKED MODELS AND SETS (12 BASES) |
$110.00 |
||
|
This system is a "Stick in the ground" style with foot pad for pushing in ground that offers versatility and ease. Can easily be placed into even the hardest ground without breaking. |
|||
|
18 bases (free blueprint of tire jump included) |
$160.00 |
||
|
Single bases |
$10.00 |
||
|
STAKED MODEL TRAINING PACKAGE #1 |
$180.00 |
||
|
18 bases with crossmembers and supports this creates 3
adjustable jumps |
|||
|
STAKED MODEL TRAINING PACKAGE #2 |
$200.00 |
||
|
12 weaves 2 jumps and 1 tire jump (lightweight for training only). |
|||
|
12 WEAVE GUIDES |
$100.00 |
||
|
Try these for faster results! 2 wire entry with single wire thereafter. |
|||
|
Minimum order of 6 guides |
$9.00 each |
||
|
PAUSE TABLE |
UKC/AKC/NADAC $175.00 Quick change design - 2 leg heights on each Extra set of legs for table add: $25.00 DOG
WALK All
dog walks are equiped with adjustable support braces that
eliminate bounce on the up and down ramps. AKC/USDAA
J.H./UKC $550.00 36" tall complete finished with AKC/NADAC/USDAA $600.00 48" tall complete funished with ULTIMATE DOG
WALK $675.00 x Same as above but height
can be adjusted anywhere from 24" to 48". FOR
TRANSPORTABLE PLANKS ADD: $100.00 x Planks are halved and
joined by a simple lever handle. TEETER
TOTTER FIXED
HEIGHT $325.00 Finished with non-skid texture, 1" square steel 1 piece
12" wide x 12' long plank. ADJUSTABLE
HEIGHT (FOR
ALL STYLES) $350.00 Finished with non-skid texture, 1" square steel 1 piece
12" wide x 12' long plank. ADJUSTABLE
COLLAPSING BASE $425.00 Finished with non-skid texture, 1" square steel 2 piece
12" wide x 12' long plank, sturdy and transportable. TRAINING
PLANKS: 8'
BOARD $100.00 12'
BOARD $120.00 To make training planks transportable add: $40.00 These planks can be attached to your own teeter base A-FRAME HEAVY
DUTY $500.00 ULTRA LIGHT
HEAVY DUTY: AKC/USDAA/NADAC $575.00 UKC $550.00 Complete, finished, with non'skid texture. Heavy duty
hinge (no piano hinges here). You can separate the A-Frame
and carry in 2 sections. TRANSPORTABLE
MODEL $650.00 x This unit breaks up into 3
or 4 pieces depending on if you separate the hinge. ADJUSTABLE
LENGTH $700.00 x This A-Frame is the same
as the ones above but has a 10" insert
"L" shaped brace. Table top and one set of legs
your choice of heights.
non-skid texture, 1" square steel
1 piece 12" wide x 8' long planks.
non-skid texture, 1" square steel
1 piece 12" wide x 12' long planks.
x Changeover takes less than 5
minutes without tools.
or retrofitted to any of the above bases. Finished with
non-skid texture, 1" square steel 1 piece 12" wide x 12'
long planks.
All
A-frames are equipped with 3 handles on each side for ease in
carrying.
x The break point is higher up
than the others on the market to alleviate bending
x on the sides.
x to be used in all styles of
Agility and breaks down into 6 pieces.
TRY
OUR EXCLUSIVE NEW PRODUCT TWO
WHEEL Assistant $65.00 Kits and
unfinished packages priced upon request. All of the
above units are available with or without slats, come with
handles that make carrying easier, and are light as possible
without sacrificing strength. All wood
surfaces are belt sanded to 160 grit finish. Then 2 coats of
primer are applied. Top 2 coats are Behr Premium grade
exterior lifetime paint. JUMPS TIRE
JUMP $300.00 1" square steel with removable feet, one handed
adjustment for height change. WINGLESS
SINGLE BAR JUMP $40.00 Metal stardards, cups at 4", 8", 16", 20", 24" and 30"
tall. Complete with 1" pvc feet. You add the cross bars. FREE STANDING
DOUBLE OXER $140.00 Metal standards, 1 piece sides. Complete with 1" pvc
feet. You add the cross bars. FREE STANDING
TRIPLE JUMP $160.00 Metal standards, 1 piece sides. Complete with 1" pvc
feet. You add the cross bars. BROAD
JUMP $200.00 4 part wood top with metal feet, stackable. JUMP
BARS 60" long without tape $2.00 60" long taped $2.50 EXTRAS
CONNECTS TO THE TOP OF THE A-FRAME FOR 1 PERSON
MOVING OF THE A-FRAME.
|
PIPE TUNNEL HOLD DOWNS (PER SET) |
$90.00 |
CHUTE TUNNEL (COMPLETE) |
$225.00 |
|||
|
Cradle style |
Barrel with legs and chute holder |
$85.00 |
||||
|
BROAD JUMP CORNER MARKERS |
$65.00 |
Barrel legs painted |
$50.00 |
|||
|
Free standing set of 4. |
Chute fabric one color |
$145.00 |
||||
|
Chute fabric multi color |
$165.00 |
|||||
Send us an email at: jetsetset@aol.com