Message Board Postings

Add New Message . Reply to Message
Back to First Page

This forum is a free service of My Gun Site and may be used for Items WANTED or Items FOR SALE as well as any comments you wish to make, or to ask a question relating to weapons. No disparaging comments to other people will be tolerated and please do not abuse this forum by adding multiple gun listings. Limit each post to one or two items, but post as often as you like. Postings may be erased after 60 days and you may re-list your item if it hasn't sold. Thank you for your consideration.

If you do not see your post, please push on the *RELOAD* button on the top of your browser. Thanks!

Read what some previous visitors have posted to the message board:

Posting of Jun 1, 2001, 19:05 EST

WANTED
2 Breech blocks (center fire) with firing pins for 44 Stevens also 25-20 cf barrel for 44 Stevens parts need to be in good to excellent condition

From: Dale Keys, - visit me at: http://

Notify:yes
[Reply to Message] [Add New Message] [Top of Page]

Posting of Jun 1, 2001, 23:23 EST

HELP NEEDED
I HAVE A FIVE SHOT .38 MADE BY FOREHAND ARMS CO. IN WORCESTER MASS. PATENT NOV. 29,1887.-JAN 3,1888. I NEED INFORMATION ABOUT THE GUN/ MANUFACTURER, OR WHERE I CAN FIND IT.

From: CHRIS, - visit me at: http://

Notify:yes
[Reply to Message] [Add New Message] [Top of Page]

Posting of Jun 4, 2001, 16:25 EST

information please
please help identify a small 32cal. pistol. it has U.S. REVOLVER stamped on it with the #48834(9?) my father-in-law received it in 1946. it holds 4 32 shells . thanks

From: raja, - visit me at: http://

Notify:yes
[Reply to Message] [Add New Message] [Top of Page]

Posting of Jun 16, 2001, 21:40 EST

Bullet Trivia -- Answer Requested
I have a question about bullet velocity. Why is it that a bullet fired from a gun with a longer barrel will travel with a faster velocity than a similar bullet fired from a similar gun with a shorter barrel? This seems to be a well-known fact, but I do not know why it is true.

From: Dub Gaberdiel, - visit me at: http://

Notify:yes
[Reply to Message] [Add New Message] [Top of Page]

Posting of Jun 18, 2001, 03:34 EST

Info. wanted J. Rupertus
A friend has asked me to try and find info. on a unique shotgun he just bought. Mfg by J (Jacob) Rupertus, Phil., PA Single shot, the barrel rotates to the right to load. Any input would be appreciated

From: Bill Moore, - visit me at: http://

Notify:yes
[Reply to Message] [Add New Message] [Top of Page]

Posting of Jun 26, 2001, 02:06 EST

Wanted, Fred James Bowie Knife
Fred James was a Sheffield cutler active in the 1960's and 70's. He made classic Mid-19th century style bowies. They keep showing up but I'm always too late.

From: Jim Miller, - visit me at: http://

Notify:yes
[Reply to Message] [Add New Message] [Top of Page]

Posting of Jul 7, 2001, 19:11 EST

Information Wanted!
I have found an old shotgun with the word “LEADER” engraved on it. The gun is in bad shape, and has no stock. Can anyone please reply with web sites where I can read about this type of shotgun’s history, origin, value, and etc? Thank you

From: Rusty, - visit me at: http://

Notify:no
[Reply to Message] [Add New Message] [Top of Page]

Posting of Jul 29, 2001, 12:33 EST

****important question*****
has anyone ever heard of a weapon called a "grand national" please advise ASAP

From: raymond kranak, - visit me at: http://

Notify:yes
[Reply to Message] [Add New Message] [Top of Page]

Posting of Jul 29, 2001, 14:07 EST

Items For Sale
Winchester Commemorative Collection 31 guns in Excellent condition also have Ammunition please e-mail me if you need more info

From: David, - visit me at: http://

Notify:yes
[Reply to Message] [Add New Message] [Top of Page]

Posting of Sep 30, 2001, 13:29 EST

What are they worth?
I am trying to help out my dad. He has a pair of Texas Marshal's - 44mag - single action - 6" barrel made by JP Sauer & Sons from Germany, Chrome plated, pearl handled, consecutive serial numbers, never been fired, still in shipping boxes. I know he has had them for at least 20 yrs. Does anyone know what they are worth?

From: Peggy Feliciano, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Sep 30, 2001, 18:11 EST

Walther p99
For Sale Walther p99 only 100 rounds fired through it comes with all original packaging plus an extra magazine and competitive sight. it is the 40cal please reply to Superfan11@hotmail.com with heading "WALTHER P99"

From: gary , - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Oct 28, 2001, 10:46 EST

Info Re: Liege United Arms Co. Ltd.
I am trying to find out some info on a shotgun that has been in the family for quite some time. Supposedly it was my purchased by my great-grandfather in the early years of the 20th Century. It was passed on to his son (my grandfather) then his son (Dad) and is now in my possession. It is a 12 gauge, double barrel (side by side), with twin triggers and twin external hammers. The walnut stock has been 'altered'. Someone, probably Dad, cut the end of it off and added a rubber cushion butt plate. (I remember Dad saying, "Watch out, son, it kicks like a southern mule!") Otherwise it is in fine, functional condition. Could someone enlighten me as to the possible age of this weapon and maybe some place I could get more information about the Liege United Arms. Co. Ltd.?

From: J. Scott, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Oct 29, 2001, 15:50 EST

Quote: 1899 Savage w/Marble Sights
I have been given a quote by a local auctioneer of $800 to $1000. He told me that this gun has the highest rating also. What could I get for it if I just tried to sell it myself?

From: Sarah, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Nov 3, 2001, 18:41 EST

GATLING GUN
PRODUCT NEWS Dear Sir / Madam, This is to inform you of progress with the development and finally the production of our .22 caliber long rifle half scale Gatling Gun. Featuring 10 barrels and the British Brodwell drum magazine system holding 720 rounds with a fire rate of about 700-1000 rounds per minute. After some considerable time we are pleased to announce the proposed production of gun serial number one. Production is strictly limited insuring the "hand made" aspect and appeal of such a unique period firearm. Please visit our website at: www.machineguns.co.nz Kindest regards Barrie Wickins Licensed Arms Dealer B & D Holdings Limited New Zealand

From: Barrie Wickins, - visit me at: http://machineguns.co.nz

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Nov 4, 2001, 06:24 EST

RE:GATLING GUN
Your URL is incorrect m8! You forgot the www! Should be http://www.machineguns.co.nz

From: Sarge, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Nov 24, 2001, 17:55 EST

Please read this, I need info!!!
I have a shotgun that I need info on. It is a "Coast to Coast" Mast Mag 12gauge model # CC660. I want to add more modern accessories to the gun but I need to know any info I can find. Thanks!

From: Mario, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Nov 30, 2001, 20:41 EST

Information Needed
I bought a Savage Arms pistol with a patent date of 1905 but, can not find the model in any of my books. It is a 7.65 and the magazine hold 10 rounds.

From: Joe, - visit me at: http://www.excite.com

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Dec 2, 2001, 04:57 EST

1836 lee Enfield
My brother is currently traveling back from Afghanistan where he has managed to obtain a lee Enfield rifle dated 1836. The rifle is in good condition and in working order. Could anybody please give me an idea as to the value. many thanks

From: neil harris, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Dec 4, 2001, 22:29 EST

Montgomery Wards Western Field Info Needed
I just received an old Montgomery Wards western field 12ga pump shotgun and I would like to find out how old it is. the model is SB 30A and on the bottom of the trigger guard are the numbers 2921. Where can I find info on this gun. Any help would be great thanks

From: Steve Servia, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Dec 22, 2001, 05:22 EST

Wanted
Marlin 218b, lever action that has been discontinued in 1995. can you help me? K. Hulsey 740/374-3984

From: Kim Hulsey, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Dec 22, 2001, 17:22 EST

Atis Shotgun
I need a magazine tube for an Atis shotgun that's a copy of the Browning A-5

From: Henry, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Dec 26, 2001, 11:02 EST

RE:Liege Arms
I alos have a shotgun made by the Liege United Arms Co. It is a 28 ga double barrel db triggers and db hammers. It weighs 3 1/2 lb in great shape I am also trying to find information. If you can help please contact me

From: John Ferguson, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Dec 26, 2001, 11:04 EST

From: John Ferguson, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Jan 4, 2002, 15:33 EST

shotgun/rifle info and valuation help needed
Hi, I just found your group and hope you can help me with some info and valuation of three shotguns and a rifle. The first is a 12g double barrel, stamped in the body is the name Riverside Arms Co. Chicopee Falls, Mass, USA. Patented April 20, 1915. I would like to know more about this gun, the maker and it's value. The second is a Wards Western Field 20g single shot, Model 94c, and 10SB94TB are stamped in the body. The third is an Iver Johnson .410g single shot, #383 or 388 6C, Champion stamped in the body. The fourth is a rifle that appears to be military. It has US with a ball and wavy lines above the ball stamped in the underside stock. It also has #3AKA3B, and #1255243 A stamped on it. The gun is a bolt-action, loads from below the magazine, has a full stock to near the end of the barrel, a folding calibrated site on the front of the magazine/body. No other identifiers on it. I know little to nothing about guns or their values. I would like to be able to sell these for whatever their reasonable value is. I don't want to make a fortune, or give them away due to ignorance of their value. Any help you guys could offer me would be appreciated. I could tell you anything you want to know about old Mopars, Triumph motorcycles, Power King tractors etc.....but guns are out of my experience. Thanks, Charlie.

From: Charlie, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Jan 18, 2002, 23:29 EST

Don't Use Gun Broker!
This is a warning to buyers about Gun Broker. Their auctions are not true auctions because they allow sellers to stop auctions at any time if they don't get the kind of money they're looking for. It's clearly against their posted rules but they refuse to address the issue. My accounts were terminated because I posted my frustrations in their forums. They can't handle the truth so they terminated my account. E-mail me and I'll forward the correspondence and tell me what you think. Pass it on to the good folks you know who work hard for their money and want a fair deal. Gun Broker is totally geared toward sellers.

From: Gilmour, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Jan 18, 2002, 23:30 EST

From: Gilmour, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Jan 18, 2002, 23:35 EST

RE:
It's because the gasses are trapped for a longer period of time with a longer barrel and so more energy is transferred to the bullet. Try this: take two drinking straws and cut one two inches long. Leave the other full length. Use two spitballs of the same size and see which blows further.

From: Gilmour, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Jan 29, 2002, 17:19 EST

RE: shotgun/rifle info & valuation
have double barrel shotgun, Riverside Arms C. Chicapee Falls, Mass. Pat. Feb.10, 1914 Would also like info on value

From: Allen E. Peterson, - visit me at: http://courttv.com

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Jan 30, 2002, 22:41 EST

RE: Question with another
I am trying to find out information on Atis Shotguns. Can you help me out? Its a PM2 clip fed 12 ga. bought it early nineties. Any help would be appreciated

From: Mo, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Feb 9, 2002, 17:42 EST

22 Ladies Boot Pistol
I have a Ladies 22 Boot Pistol made by "J. Stevens A&T Company" Chicopee Falls Ma." can anyone tell me about this pistol? Any history on company and are there alot of these around? Thanks, Alfee

From: Alfee Fryer, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Feb 21, 2002, 18:30 EST

Need Info on an old shot gun
I found an old double barrel shot gun at our farm. My Dad said it was his grandfather's maybe over 100 years old - did any one ever hear of a T Barher - it has a picture of a rabbit on it but that is all I can find and I know it is very old in very good shape Please reply if you know any thing about this gun

From: Sal, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Feb 26, 2002, 20:41 EST

Help > need infromation
This is Sal - I have the BARHER double barrel shot gun here is my e-mail address > sciarleglio@snet.net < if any one read my posting and can give me any information on this gun I would appreciate it very much. Thank you

From: Sal , - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Feb 28, 2002, 10:26 EST

RE: Bullet Trivia
It is not necessarily true that a longer barrel equals higher velocity now with smokeless powders as it was with black powder because the extra barrel length gave the powder charge time to burn more completely. Modern powders have more tightly controlled burning rates to give the best performance in barrels of varying lengths with varying charge/bullet weights.

From: Tom Kieffer, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Mar 2, 2002, 09:32 EST

WANTED
I need info. on, THE RIVERSIDE ARMS CO.of Chicopee Falls MA.. A friend has come into possession of a double-barrel 12 gauge, side by side, with a patent date of 04/20/1915. We have never heard of The Riverside Arms Co. here in Tn..

From: Eddie, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Mar 9, 2002, 14:30 EST

Wanted
Seeking a magazine for a Savage Arms Co. .410 shotgun. Springfield Model 18, Series F. Does anyone know where such an item may be found. Please e-mail a reply to StewNTexas@aol.com. THANKS

From: John Stewart, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Mar 14, 2002, 22:26 EST

Wanted: 32 caliber semi-automatic pistol
If any knows where I can find a 32 caliber semi-automatic pistol with a pearl handle (preferably non-operable) please email me.

From: Cadie, - visit me at: http://theroadhouse@homestead.com

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Mar 25, 2002, 14:27 EST

stevens westpoint 20 ga pump
I would like to know how much a Stevens Westpoint shotgun model 167 pump 20ga would go for in okay condition with pock marks on the receiver. it would be great if you could reply back to me.

From: David, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Mar 26, 2002, 13:32 EST

RE: shotgun/rifle info and valuation help needed
I am also interested in a shotgun about the same as the 1915 Riverside Arms you mentioned. I have a Riverside Arms 12 gauge double barrel dated Feb 10, 1915 with a handmade stock. Any further info would be appreciated.

From: Kathleen, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Mar 29, 2002, 08:19 EST

would like information and price on this
a 22 caliber side by side rifle made in Germany has proof marks but no name would like information on this also value if possible

From: Frank Burkhart, - visit me at: http://frank and dotte

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Mar 29, 2002, 08:46 EST

information and value
Information on 22 cal. SKS rifle. made in Germany, Has engraving, cheek piece on stock, has proof marks, believed to be in Sohl, Germany. Has no name. Has a number on the left side of frame 1858.

From: Frank Burkhart, - visit me at: http://AOL Welcome

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Mar 31, 2002, 19:10 EST

Texas ranger compass
We are looking for a value on a Texas ranger compass, dated in the late 1800's. Can anyone out there help us.

From: Carol, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Apr 3, 2002, 15:28 EST

NEWBIE NEEDS INFO
I INHERITED A SINGLE SHOT 12 GAUGE BREAK ACTION SHOTGUN FROM MY DECEASED AUNTS ESTATE. IT WAS MANUFACTURED BY THE RIVERSIDE ARMS CO. OF CHICOPEE FALLS BUT THERE IS NO PATENT DATE OR SERIAL NO. OR MODEL NO. ANYWHERE ON THE GUN. IT LOOKS QUITE OLD. WHERE WOULD THE PATENT DATE BE LOCATED ON THE GUN? IS IT POSSIBLE THAT THE OLDER GUNS HAD NO PATENT DATE, SERIAL NO. OR MODEL NO? IT LOOKS THAT THE STOCK HAS BEEN REFINISHED. WHAT WOULD BE THE VALUE OF SUCH A GUN? THANKS TO ANYBODY THAT REPLIES.

From: RICK, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Apr 14, 2002, 16:18 EST

Savage model 5/22 short to 22 L.R. /Stock
I am trying to find a stock foe a savage-Model 5. it fires 22 Shorts and 22 Long Rifle shells. it has a tubular feed, I am looking to purchase a stock for it. Latemoes Thanks

From: Homer Ross, - visit me at: none

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Apr 14, 2002, 20:49 EST

Information wanted on a J Stevens 22 single shot rifle
My father has a J Stevens single shot rifle .I believe it was his uncle's grandfathers which could be dated back to the turn of the century we are looking for any information on this gun and also the value please help if you can

From: Amy Snyder, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Apr 27, 2002, 19:38 EST

Information wanted
Help looking for information on Hartford fire arms co have a 12 gauge double barrel, exposed pull back hammers. Thanks

From: tom, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of May 2, 2002, 20:49 EST

Wells Fargo Stage Coach Shotgun
Interested in pics of authentic W.F. shotguns....spec.. stagecoach.

From: David, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of May 16, 2002, 00:29 EST

Help!!! Who can import ammo for a collector??
I need to find someone who can legally import 600 rounds of WWII live ammo into the USA. Anybody know of anyone who can help?

From: Jaso Alvord, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of May 20, 2002, 10:42 EST

WANTED
I need the stock and forearm and brace fitting for a 12 gage Double barrel J Stevens Model 250 shotgun. Please help me fine this part.

From: Tammy Whiteman, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of May 20, 2002, 10:56 EST

WANTED
PLEASE HELP ME FINE PARTS FOR A 12 GAGE DOUBLE BARREL SHOTGUN J STEVENS MODEL 250 I need the stock and forearm and brass fitting. PLEASE HELP ME Thank You!!

From: Tammy Whiteman, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of May 21, 2002, 15:36 EST

RE: wanted
Riverside arms company is owned by the Stevens gun company. Stevens made two models of side by side shotguns under the riverside name.

From: Andy, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of May 25, 2002, 18:41 EST

Need parts & help identifying 1890"s Belgium
Has "bridge" on sidelock; has domestic barrels?

From: joe vandruff, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of May 26, 2002, 00:34 EST

Wanted: WWII era rifles
I am interested in starting a personal collection of WWII era rifles. Can someone recommend a reliable source? Does anyone have any advice or tips they could share? The guns don't have to be mint condition, or even work. I just want to build an interesting collection I can pass on to my kids. I have seen ads in the pages of shooting magazines that feature very low prices but only ship to someone with an FFL. How does that work? What can I legally do to get one of those guns in the ads? Thanks - Adam

From: Adam, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of May 31, 2002, 15:19 EST

information on Riverside Arms 12 ga shotgun
Have a 12 ga Riverside Arms shotgun, with patent date of 2/10/1914, serial 62112. Can anyone tell me value and about how old it is.

From: shirley thomason, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of May 31, 2002, 18:30 EST

guns for sale
I have several commemorative firearms that I'm trying to sell. I have listed some of them online at www.quivers.net/guns.htm. In addition to what's listed I have others such as several mint condition Luger Test Eagles. If you are interested, please feel free to e-mail back.

From: Richard Skene, - visit me at: http://www.quivers.net/guns.htm

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Jun 7, 2002, 18:17 EST

Info Please
I have a riverside arms co. 12 ga double barrel the co was in Chicopee falls Massachusetts patented Apr 20 1915 i need any info or where I can find info on the gun

From: kevin roback, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Jun 9, 2002, 22:19 EST

WARD WESTERN FIELD .22 LR
Could someone tell me a little bit about a Ward Western Field .22 LR I found in an old town in Alaska, with inscriptions like 14M and 488A, how old are these rifles and what's their worth. Thank you.

From: Gus Alcala, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Jun 14, 2002, 23:58 EST

Marlin GUN parts
I AM LOOKING FOR A LOCKING BOLT 1 & 3/16" FOR A MARLIN MOD. 37/ pump action 22 cal. rifle.

From: Bob Tisdale, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Jun 15, 2002, 13:03 EST

RE: JP Sauer pistol set
My Guess would be about $500 for the set.

From: Paul, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Jun 15, 2002, 13:13 EST

JP Sauer and sons
They were a cheap import. At the time the set probably cost less that $250. Today my guess is they are worth twice that.

From: Paul, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Jun 15, 2002, 15:46 EST

Savage arms 94C 410 shotgun trying to date
I have a Savage Arms 94C 410 The only markings I have found on are on the barrel D (maybe a P} ST and two symbols one looks like a mushroom and one looks like a top hat.

From: Micheal, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Jun 17, 2002, 23:02 EST

wanted
need shells for a Remington 5mm model number591m does anyone know where i can find them?

From: madalan bills, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Jul 9, 2002, 14:53 EST

RE:
I ALSO HAVE A MODEL 250 STEVENS SHOTGUN. PLEASE E-MAIL ME AT THE ADDRESS LISTED SO THAT WE CAN EXCHANGE INFO.

From: DAVID BROWN, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Jul 11, 2002, 23:52 EST

RE: What Are They Worth
I don't have a clue as to the worth of the pistols but would be interested in buying the pair since I'm from Texas. I don't even know if they're for sale! For me, it's a Texas thing. I like to find things to pass down to my three boys and one daughter. Get in touch if interested. Thanks, W.F.L.

From: William F. Lamar, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Jul 14, 2002, 23:56 EST

RE: Forhand
As in Forehand and Wadsworth. Look it up in Flayerman's book under the two names. You will find a large list of arms.

From: bill, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Jul 15, 2002, 00:01 EST

RE: bullet trivia
Because the longer barrel allows the pressure to build to a higher degree before spitting out the bullet.

From: bill, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Jul 15, 2002, 14:56 EST

RE: NEED INFO ON AN OLD SHOTGUN
I HAVE FOUND A GUN MARKED SAME AS YOURS. T. BARKER WITH ENGRAVINGS. DOUBLE 12 GA. I HAVE FOUND NO INFO ON THIS GUN YET. IF YOU GET INFO B4 ME, POST IT ON BOARD. I'LL DO THE SAME.

From: BILL SIMIS, - visit me at: http://none

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Jul 15, 2002, 15:14 EST

WANTED: INFO ON OLD DOUBLES
TWO 12GA SHOTGUNS. BOTH SIDE BY SIDE WITH PULL BACK HAMMERS. 1) STAMPED T. BARKER WITH FINE ENGRAVING AND STOCK WORK. NO SERIAL NUMBERS AVAILABLE. 2). IVER JOHNSON DOUBLE WITH PULL BACK HAMMERS. NO SERIAL NUMBERS OR OTHER MARKINGS. BOTH GUNS NEED TO BE RESTORED. I WOULD LIKE TO KNOW THEIR APPROXIMATE VALUE BEFORE I INVEST MY TIME AND EFFORT IN RESTORATION. TO RESTORE WOULD TAKE SOME TIME. MY EMAIL IS lsimis@csolve.net THANKS.

From: BILL, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Jul 22, 2002, 20:40 EST

Wanted: Walther P99 Barrel
I am looking for a threaded barrel for my Walther P99QA 9mm. Im a disabled shooter trying to make a counter balance for my gun can anyone help please.

From: Victor, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Jul 24, 2002, 18:16 EST

Winchester 101 serial #?
Does anyone have any info on a Win .12 guage 101 serial # k181544? Year made? value?

From: Mark Gardner, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Jul 25, 2002, 23:47 EST

RE: Sauer pistols
At one time Sauer was imported by G-U Inc. in Omaha, NE. They might be able to help youy determine when they were imported. If the guns were imported after 1968 the importer's name will be on the gun somewhere. G-U is at 402.330.4492 or www.skbshotguns.com

From: diode, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Aug 9, 2002, 20:24 EST

Iver Johnson Border Patrol 380
I'm interested in picking up on an Iver Johnson Border Patrol 380

From: Epena, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Aug 12, 2002, 17:56 EST

i have a 410 ranger bolt action single barrlle shotgun for s
i have a 410 ranger single barrell shotgun bolt action approximately 60 yrs old. i no longer need or want this piece, make a offer a good offer...serious offers only thanks ! great condition

From: j scherer, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Aug 15, 2002, 16:20 EST

Mass Arms Co. Chicopee Falls 12GA
Have an old single barrel shotgun Stamped (Mass Arms Co. Chicopee Falls) I believe it is a 12GA I would like to find out more information on.

From: KenPless, - visit me at: http

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Aug 16, 2002, 07:10 EST

I have an 1800's Colt Damascus Twist Barrel Shotgun
Family heirloom for sale. Hasn't been fired since mid 1940's. Original leather case in poor condition.

From: James McCullough, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Aug 16, 2002, 14:55 EST

Wards Western Field 22 Bolt Model 04M 390A
Had this rifle 60 yrs. Trigger guard disintegrated. Want to acquire replacement. Any help appreciated.

From: J. V. McCullough, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Aug 18, 2002, 23:38 EST

RE: Shotgun and rifle information and valuation needed.
Charlie, I think your Riverside Arms Co. shotgun was made by J Stevens Arms co. They were a division of Savage Arms and I think they may have information on their older brands as this. Check their website www.savagearms.com I think, and they have a historian that can help out. The Iver Johnson Champion .410 was made from 1909-1973. If it is one of the older plain models with no checkering on the stock or forend or pistol-grip cap or a top matted rib then it is worth from $100-$150. The rifle you have sounds like it may be a 1903A1 Springfield rifle. It was used during WWI and WWII. If you could send pictures of all three guns to me I could look them up and give you a general idea as to a minimal condition for your own use. I am not a professional appraiser, just a collector. If you were wanting to sell the Iver Johnson, I would like to buy it from you for a good price. I have an Iver Johnson 16 gauge and it needs a friend. If you have a 1903A1 rifle, it may be worth from $400-$975 depending on how much of the original finish and parts are still there. I have one that was sporterized or "butchered" by some not so intelligent person. But then they were selling for $15-$20 from the government as surplus.

From: mike mette, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Aug 24, 2002, 16:52 EST

Info on Henry Arms Co. Dbl Barrel Shotgun
I have a dbl barrel shotgun with Henry Arms Co. on both sides of the barrel. Ser# 2434 on one side and 753 on the other side. On top of the barrel it says Laminated Steel Belgium. I have not found any information about this gun and would like to know if anyone else has any info and/or knows what the value of this may be.

From: Gordy, - visit me at:

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Aug 25, 2002, 21:27 EST

FOR SALE;
BROWNING PIGEON GRADE 3" MAG. IN ORIGINAL BOX CIRCA 1972. OFFERS, I'M IN BRITISH COLUMBIA CAN. ABSOLUTELY NEW CONDITION. '

From: KEN MESSERSCHMIDT, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Aug 25, 2002, 21:31 EST

FOR SALE:
Sako "Finnwolf" lever action .243 with Rdefield 3 -9 X Widefield scope and tip off mounts, absolutely as new.

From: KEN MESSERSCHMIDT, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Aug 29, 2002, 08:26 EST

Wanted!!!!!!!!!!!!
A double barrel over and under shotgun 16.guage. Must be is good condition. Do not wish to pay any more than $450.00

From: Daniel, - visit me at:

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Sep 1, 2002, 16:45 EST

Western Field 20 Gage Bolt action question
I just purchased a 20 gage Western Field (Montgomery Wards) shotgun at an estate sale. Several boxes of shells came with the gun. Some are 3 inch magnum shells and others are 2 and 3/4 inch high velocity shells. There are no markings on the barrel or anywhere else that i can find to indicate the chamber size. Both size shells seem to fit the gun ok. Is it safe to use either size shell in the gun? Any knowledgeable advice is appreciated, Thanks, Martin

From: Martin Tillett, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Sep 3, 2002, 23:06 EST

RE: Info. wanted J. Rupertus
We also have a similar single shot Rupertus Shotgun with the barrel that rotates to the right for loading and are seeking information on it.

From: Jack Cook, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Sep 9, 2002, 00:40 EST

INFO NEEDED
need info on Atis made automatic shotgun recoil operated 26 in vent rib barrel

From: frizl, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Sep 9, 2002, 16:31 EST

Page-Lewis Arms Co., Chicopee Falls Mass. Model A Target 22 Rof
My Brother and his friend found a 22 single shot rifle in a house his friend purchased and it was made by this company according to what is on the barrel of the gun The Patent date it April 25th 1926 We are interested in finding out more about this company and cannot find anything on the internet Could someone please direct us to a site where we could find out more about this company and this gun Thank you

From: Catherine, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Sep 9, 2002, 22:22 EST

RE:
"REPLY FOR NEWBIE" I have viewed what sounds familiar to your Single Shot 12 ga., numbers, probable serial numbers appear just below firing pin in chamber. Your numbers may be worn away or possibly still appear faintly

From: dan, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Sep 12, 2002, 02:48 EST

Clint Peoples
This may not be the right place for this message, but here goes. I came across this site while doing genealogy research on the Peoples family. I have been told my great grandfather was Clint's uncle or cousin. Does anyone have any family info or knew how I can connect his family? Thanks

From: Rebecca Osborn, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Sep 13, 2002, 11:14 EST

RE: T. BARKER SHOTGUN
T. BARKER WAS THE TRADE NAME FOR SHOTGUNS DISTRIBUTED BY THE BAKER, HAMILTON AND PACIFIC COMPANY IN CALIFORNIA. GUNS WERE MADE BY IVER JOHNSON. VALUE UNKNOWN.

From: BILL, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Sep 21, 2002, 20:47 EST

16 Ga. S by S Springfield Arms
Need info and approx value of side by side 16Ga. double with double triggers. Good condition, except stock is refinished. Gun is marked "SPRINGFIELD ARMS, CHICOPEE FALLS, MASS. USA' Any info appreciated.

From: GARY J, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Sep 23, 2002, 01:54 EST

Info on a riverside arms 1914 shotgun
I have a double barrel shotgun, twin triggers, twin external hammers.1914 riverside arms, mass. in great shape. If some one could tell me about it & how much it is worth i would appreciate it, thank you.

From: keenan wells, - visit me at: http://dragbike.com

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Sep 23, 2002, 11:12 EST

HELP!!! James Reid Knuckleduster 22. cal
Please, if there is someone out there who has a MY Friend knuckleduster or a diagram of the internal parts I would greatly appreciate a copy or photo. Will pay of course. Matt Foster chemfolk@psnw.com

From: Matthew Foster, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Sep 23, 2002, 22:40 EST

Forehand Arms 38
recently acquired a forehand arms 5 shot s&W for 35.00...i heard this was a forerunner co b4 h&r...although a cheap revolver...it is mechanically in great shape...it does have some different design features though...push button release for cylinder and seems to have a sturdier trigger...flat hammer striker to hit the firing pin located in the frame...any info on where i can find company information would be helpful..

From: bill, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Sep 24, 2002, 18:31 EST

History of old shotgun
Hope you can help. I was given a 410 shotgun from my Grandfather in about 1955 or so. My uncle used the gun when he was a lad. It is a Harrington & Richardson Arms Co. of Worchester, Mass under the USA patent Feb. 27,1900. The serial number on the barrel and under the trigger guard is A89789. What can you tell me about the gun?

From: Bill Dreyer, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Sep 26, 2002, 13:17 EST

RE: Forhand .38
I have one as well, any luck finding any info

From: Don Wick, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Oct 2, 2002, 11:53 EST

For Sale. 12ga. Mass. Arms. Co. on gun, need info
This gun has been in family for over 30 years plus. I cannot tell the age and would like to know the approximate values. please email me at davidw@chartermi.net thanks.

From: Dave Waldschmidt, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Oct 2, 2002, 20:06 EST

T BARKER 12 GA
I'M TRYING TO HELP I GUY I WORK WITH LOCATE PARTS AND INFO ON AN OLD SHOTGUN. IT'S MARKER T BARKER AND IT'S A 12 GA SIDE BY SIDE DOUBLE WITH EXPOSED HAMMERS THAT LOOK LIKE THEY BELONG ON A PERCUSSION GUN. PLEASE REPLY TO LIBERTYGUNSMITH@AOL.COM THANKS CHARLIE

From: CHARLIE, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Oct 4, 2002, 20:58 EST

wanted bad
looking for replacement parts for a Davis industries derringer d38 please email me @ across747@aol.com thank you

From: andre cross, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Oct 5, 2002, 21:47 EST

RE: 16 GA
Just bought one. If you learn more, please let me know.

From: Pete, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Oct 6, 2002, 11:19 EST

wanted parts
i have a old Ivor Johnson 12ga single shot i am trying to find parts for it was my husbands grandpas gun it has a flat spring below the barrel i need that spring the only thing else i could find on the gun as for make and model is thix it has it two places on the inside of the forearm stock and behind the trigger guard any help would be great

From: alicia keeton, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Oct 8, 2002, 01:20 EST

Rogers & Spencer Revolver
I am looking for info on a old cap and ball revolver that has been in my family for years. It is a Rogers and Spencer, .44Cal revolver. Anyone with info/address that I can contact...tks..

From: Earle Tatlow, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Oct 10, 2002, 23:36 EST

Information on Stevens Arms 22 Rifle
I have a Stevens Arms Springfield Model 15 22 caliber short rifle from the 1930's. It's in very good condition. I'm inquiring about the approximate value.

From: Richard Cox, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Oct 11, 2002, 11:11 EST

Need Info... smokeless muzzle loader
I am seeking info on a series of .58 cal rifles made on old dbl shotgun platforms designed to shoot a cast, lubed, lead bullet using 23 gr. of 2400. The guns are made by Cliff Huston and are reported to be guaranteed game killers due to the ballistics and bullet design. I would like to know how to find one.

From: John Emmert, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Oct 11, 2002, 17:42 EST

J.P. Sauer & Sohns 12 ga.
Info Requested I have a J.P. Sauer side/side 12 ga. shotgun. This gun has external hammers, dual triggers, and elaborate engraving on the receiver. However, nowhere on the gun can I find a model #. any ideas where to look?

From: Chris, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Oct 12, 2002, 16:24 EST

16ga Western Field Pump
Just purchased a shot gun 16ga Western Field Pump. Serial # 71406 next to a B. There is a Browning Patent Barrel-Has a full choke. Has a picture of a bird dog on the side. Can anyone tell me the value.

From: David, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Oct 18, 2002, 03:05 EST

12G SHOTGUN WANTED!!!
WANTED to buy.... 12G side by side single trigger. Must be a SKB. Good condition. $1000 and under. Must be willing to send overseas.

From: Bruce, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Oct 22, 2002, 18:02 EST

Colt Officer's Model Target Revolver
I have a Colt Officer's Model Target revolver that is single action only. I have been told that no such pistol exists. The serial number is 525***. Does anyone have information on this model?

From: Hank Springer, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Oct 24, 2002, 16:35 EST

Wanted
Information on a shotgun. made by Riverside Gun Co. Chicopee, Mass. single shot 16ga.

From: Brian Govier, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Oct 25, 2002, 05:48 EST

Stevens savage 16 gauge double barrel side by side shotgun
i am trying to help my brother find the value of a Stevens savage 16 gauge double barrel side by side shotgun. model 311a.i have no idea what I'm looking for really other than the worth of a gun so i can't find anything helpful really. so any help would be greatly appreciated. thank you!

From: beth , - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Oct 25, 2002, 09:14 EST

Winchester Model 72
Hello, I am looking for a Winchester model 72 gun stock. If anyone has any information please drop me a line. Thanks, Pete

From: Pete, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Oct 28, 2002, 19:56 EST

Item For Sale
For Sale: Ross 1905 Sporterized Rifle. 303 British caliber. 80% good condition. Contact seller with any questions.

From: Michael Smith, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Oct 28, 2002, 22:00 EST

RE: Leige United Arms Co Ltd
Congratulations on having a firearm from an area noted for fine firearms: Liege, Belgium. Earlier Browning Auto 5's and Superposed shotguns were born there. Yours likely predates 1900 so you may want to check the barrel markings for additional information and powder type before firing it, as it may not handle smokeless powder. I have a somewhat newer SxS by the same maker that the previous owner sys he got in the 1930s, no model name, but a serial number 31236, two triggers but hammerless, knurled solid rib, but have not found any definitive data regarding dating of the guns by serial numbers from this company. I have seen several other SxS (listed in Australian auctions for modest prices (about $250 US) even though I find mine to be a fine shotgun and worth more than that to me as a functional firearm. I too would appreciate learning of a web site or reference with more information about this company and any references to describe and interpret the company markings, as well as more about your shotgun.

From: Karl Lauten, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Oct 29, 2002, 11:36 EST

Hoping to find more information
This is a 12 gauge Remington arms although it was patented under browning it was made June 16th 1903. It is a model 11-A shotgun. I have been unable to find information on this particular firearm. If anyone has info on this I would greatly appreciate it.

From: Jennifer Bell, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Oct 30, 2002, 16:15 EST

T Barker 12 Ga
Does anyone know about the T Barker 12 ga shotgun? This gun is in very fine shape. The stock plate shows dogs and deer running.

From: D Zimmer, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Oct 30, 2002, 16:31 EST

RE: T Barker 12 Ga
I also have a t barker 12 ga, THIS ONE IS IN VERY FINE SHAPE WITH LOTS OF DETAILED TOOLING NEAR THE TRIGGERS AND ON THE STOCK. What IS IT WORTH?

From: Dave, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Oct 31, 2002, 12:20 EST

need to know
I have a early model J. Stevens Arms .22 cal model #53b single shot, bolt action rifle and i cannot fine that model anywhere! If you have any info. of this model please contact me

From: rob staggs, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Nov 1, 2002, 11:25 EST

E. James & Co. 10 Gauge Shotgun
I need information on the history and value of a 10 gauge double barrel shotgun marked "E. James & Co." with additional markings that look like "Love Day St." "Birm" & "IV". I know the gun is at least fifty years old if not older. Please advise.

From: Todd, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Nov 2, 2002, 11:38 EST

Inquiry
I am looking for information about a gun manufactured by J. Stevens A&T Co. in Chicopee Falls, Mass. The gun has USA Pat. APR 1794 engraved on it. Any information would be helpful.

From: Jill, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Nov 3, 2002, 06:06 EST

Wanted: Magazin Sako Finnwolf
I need a new magazine for my Sako Finnwolf cal .308 who can tell me where to buy.

From: Manfred Weber, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Nov 3, 2002, 10:09 EST

RE: ArmaLube Update
The new ArmaLube web site is up and running. Please check it out at http://www.armalube.com. e-mail: info@armalube.com Look for FREE SAMPLE offer. Thanks

From: Bob LaSalle, - visit me at: http://www.armalube.com

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Nov 3, 2002, 21:55 EST

Western Field
I have recently purchased a Western Field 12 ga. pump with the following numbers on it 18762 B Anybody know how old this gun is and who made it?

From: Craig Holcomb, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Nov 3, 2002, 21:59 EST

RE: Western Field 16 ga. pump
I have a Western Field 12 ga. with a bird dog on the side also. The number beneath the trigger is 18762 B I am also having problems finding info on my gun.

From: Craig Holcomb, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Nov 4, 2002, 00:30 EST

Double Barrel 12g. Side by side
i have a 12g. side by side, not sure of model, Riverside Arms Co., Patend April 20, 1915, i need parts!!!!!

From: JOSH DODDS, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Nov 4, 2002, 15:43 EST

Custom KNive for sale
I have a custom Damascus knife with stag handles, and custom sheath I would like to sell. It has a beautiful ladder pattern, and silver inlays on the handle. Would make a nice piece to someone's display. Can send photo's to serious inquiries.

From: Rusty, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Nov 4, 2002, 22:20 EST

Need Info Please
Can anyone offer any information on the Baker Gun Company? I have a beautiful side by side shotgun and am curious about it's history but can't find anything.

From: Glenna, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Nov 7, 2002, 15:58 EST

Wanted Stevens 345 Parts
Looking for a stock for old Stevens Model 345

From: Bruce Schroeter, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Nov 9, 2002, 20:14 EST

Information on Bay State 20 ga Shotgun.
I have a 20 ga shotgun, the only name I can find on it is "Bay State" Worcester, Mass. I need the bolt that holds the stock on. Anyone know anything about this gun company or where to find a part for it? Steve

From: Steve, - visit me at: None

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Nov 12, 2002, 23:23 EST

I'd like to know the value of this gun:):)
I have a 1913 Stevens .22 single shot lever action 17inch barrel crackshot. Does anyone have any idea of the value..?? Thank you for your time Lorraine

From: Lorraine , - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Nov 13, 2002, 12:05 EST

Information: Stevens Model 235
I need information on a Stevens Model 235 Double barrel, 32 inch, external hammer shotgun.

From: William Guild, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Nov 15, 2002, 16:19 EST

Riverside Arms Double Barrel 12 gauge
Does anyone know anything about Riverside Arms shotguns built in 1914? I can't seem to access any messages on this board after June 2001. Any secrets? Thanks.

From: Shan Delmar, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Nov 17, 2002, 02:03 EST

J Stevens arms company 410 gauge hand gun
Would like to know if anyone has knowledge of value of this J Stevens single shot 12inch barrel 410 gauge hand gun circa 1927.

From: David A Young, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Nov 21, 2002, 14:50 EST

Fox double barrel 410
Any idea what Fox series 410 dbl barrel is worth, it has the fox ingraving behind the triggers?

From: john, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Nov 21, 2002, 17:11 EST

Needing information on a Wespoint model 16 ga single shot sh
On case stamped "Westpoint Model 948-DStevens Arms Westfield, Mass. U.S.A". Inside case stamped"MH1". On barrel stamped" Select forged Steel proof tested 16 Ga 23\4 inch chamber Breaks down into 3 pieces. Very good condition.

From: Ric, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Nov 24, 2002, 11:01 EST

INFO NEEDED FOR W. H. HAMILTON
The shotgun is highly engraved, exposed hammers, stamped Fine Damascus BELGIUM on one barrel and on the bottom side of barrels is stamped 7522. I have pics. Would appreciate information about when it was made, current value, etc.

From: Rick Mackey, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Nov 25, 2002, 11:16 EST

Info needed for a 410
Looking for information on a 410. Only markings on the gun is Hercules and then also Montgomery Ward is marked on it as well. There are numbers on the bottom: 90429A This number is also inside as well. Do not know much about this gun ie: age, info on it etc. My father acquired this gun at an auction and needs to find parts to it. There is a part missing. I think he said it was near the breach? If you can't tell, I know nothing about the names of gun parts. All I know is the missing part is on the top of the gun near where you put the shell. Looking for parts to it. Does anyone know where he could find parts to it? ANY information or a heads up to a link where we can obtain info would be GREATLY appreciated. Please email me with anything.

From: Lesa, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Nov 29, 2002, 12:23 EST

RE: bullet velocity v. barrel length
the longer the barrel is the more chance the powder has to act on the bullet. This of course is subject to the law of diminishing returns as the gasses from the powder only have so much energy. Also different calibers have different purposes therefore pistols with smaller cases and faster burning powders require shorter barrels to reach their potential, the converse is true with larger case capacity and slower burning powders.

From: c, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Nov 29, 2002, 12:52 EST

need info please
I'm trying to find a replacement clip for my Remington Model 788, in a 6mm? Any suggestions? I've tried firearm stores with no luck. thanks!

From: Bill, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Dec 2, 2002, 22:33 EST

RE:
Rob, I am in the business of restoring firearms. I just restored a model 53b. What is it you would like to know?

From: William E. Sullivan (ffl-gunsmith), - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Dec 6, 2002, 02:02 EST

Remington model 700
Anyone know where i can find a used receiver for a model 700 adl 30/06 Remington?

From: Tim Neff, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Dec 7, 2002, 19:04 EST

Wheel lock plans
Looking for plans to scratch build a 50 cal. wheel lock rifle, can anyone help?

From: John Butler, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Dec 10, 2002, 11:28 EST

RE: Leige United Arms Co Ltd
Karl. Your SxS sounds very similar to my own. Dual triggers, but hammerless. Mine has the same solid rib. Also, very ornate scroll work on most of the metal. I think that is somewhat common for Liege firearms. I am also looking for information, and have yet to find much. I did find an email address for Liege-Arms in Belgium. I have written them, but have not heard back. The address is liegearms@hotmail.com if you are interested.

From: Ben Booth, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Dec 10, 2002, 21:10 EST

RE: BULLET TRIVIA
The longer the barrel the more efficient the powder burns

From: Duane, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Dec 10, 2002, 21:14 EST

wanted
forearm for J Stevens 410 gauge single shot gun model 94.

From: Ernest Sallee, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Dec 10, 2002, 21:48 EST

Savage Model 720 AUTO 12G
TRYING TO FIND VALUE FOR A SAVAGE MODEL 720,AUTO,12G TO DETERMINE WHETHER IT IS WORTH REPLACING THE BARRELL. AND IF IT IS WHERE TO FIND REPLACEMENT BARREL. PLEASE HELP!!!!!

From: COLENE, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Dec 12, 2002, 17:34 EST

Winchester shotgun
anyone know what a Winchester 12 ga shotgun made in 1836 might be worth, or where I could find out? Thank you for your help

From: Roger Jones, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Dec 14, 2002, 11:46 EST

RE: Charlie posted Jan 4, 2002 at 15:33
I also own a Riverside Double barrel patented April 20, 1915. It is in very good condition. I am interested in finding the value of this gun. If you know or can give me some information where I can find out I would appreciate it very much. Thank you very much. Anthony Testa.

From: Anthony Testa, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Dec 16, 2002, 20:15 EST

Mossburg 20 gage
My husband has a 20g Mossburg shotgun, bolt-action and was wondering what it would be appraised for. the name and gage is on the barrel

From: Barbara Julian, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Dec 20, 2002, 20:02 EST

Over under shotgun
I'm looking for an over under shotgun. A rifled slug barrel over a full choke. Any idea where I might find one?

From: Jason, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Dec 22, 2002, 11:42 EST

Wanted, Parts Request
I have a J. Stevens circa 1916, model 425, "High Power" 35 cal., lever action. I am looking for receiver parts. Pls. dig deep, blow off the dust and contact me with any- thing you have or places and/or people to contact. George Histed (807)767-1324 histed@microage-tb.com

From: George P. Histed, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Dec 23, 2002, 14:31 EST

RE: "Leader" Gun
Rusty, Your gun is almost certainly a Baker Batavia Leader manufactured by the Baker Gun company of Batavia, New York. It could also be a Baker Batavia Leader mfg. by Crescent Arms Company for Folsom Arms of Norwich CT. Baker sold the Company to Folsom in December of 1919. This grade gun in good condition with steel barrels is worth between $325 and $500 depending upon condition. If it has Damascus barrels it's probably worth less. Hope this helps. Bill Glueck

From: Bill Glueck, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Dec 26, 2002, 08:17 EST

Info wanted
Trying to find out when some guns were made. H&R, Westernfield, J.C. Higgins, J. Stevens Marlin, Hawes.

From: Dianne Bush, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Dec 26, 2002, 11:28 EST

information needed regarding western field 12 gauge pump
I recently acquired an old Western Field 12 gauge pump shotgun. The gun is in good working condition, except that the thread-on choke fitting is missing. It is a model #enh-560-8A. Does anyone have any info as to where I might acquire the choke I need. Thanks

From: Joey, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Dec 26, 2002, 12:47 EST

wanted Davis Ind. parts
i need a lock lever for my Davis industries d38. i know they are not in business anymore. where can i get this. PLEASE HELP

From: andre, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Dec 29, 2002, 18:35 EST

ID on a 1915 Ranger double barrel
that's all that is on the barrel. appreciate any help. Rik

From: Rik Glasgow, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Dec 30, 2002, 15:02 EST

Information Please
Grandfather left old Harrington and Richardson Co 12 ga shotgun. Appears to have been made in 1900.Is there any value?

From: Doug Perry, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Dec 30, 2002, 19:26 EST

Information Needed
I need to find where to look for information on a double barrel 12 ga Stevens A & T. My father gave this to me yesterday and it has a little flash rust on it. Should I clean it or take it to a gun shop ? Also how old is it and is it safe to shoot it? The only info on the is Stevens A&T Co Chicopee Falls Mass Pat Applied For Co. Any info will help.

From: Jon Dent, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Dec 31, 2002, 00:15 EST

HELP IDENTIFY SIDE BY SIDE
DOUBLE BARREL SIDE BY SIDE SHOTGUN/RIFLE COMBO, RABBIT EAR HAMMERS, DOUBLE TRIGGER'S BREAK DOWN UNDER FOREARM, ONLY NUMBERS, UNDERSIDE BARREL,8149 BELOW IT 26.ONLY OTHER IS A, LOOKS LIKE A CROWN AND A V. THE V IS BELOW THE CROWN. PLEASE HELP ME FIND OUT WHAT EVER I CAN. THANK YOU.

From: CARY SWIFT, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Dec 31, 2002, 12:04 EST

RE:1915 riverside double barrel
I have the same shot gun that you are looking for. Mine is in great condition. I am willing to sell my gun for a fair price.If you are interested please make me an offer

From: Kurt Vanzeeland, - visit me at:

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Jan 1, 2003, 16:02 EST

RE:
I See Message

From: Doug, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Jan 3, 2003, 18:26 EST

RE:
the longer barrel makes the bullet go farther and faster because the bullet is pushed by the pressure inside the barrel the entire time it is inside the barrel and since the bullet is in the longer barrel longer it is pushed longer thus gaining a little more speed... that's the best i can explain it. when the bullet leaves the short barrel there is still pressure that could be utilized that just escapes into the air.

From: brandon havis, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Jan 4, 2003, 14:08 EST

wanted rear sight Stevens model 125
I need a rear sight and dovetail for a model 125 or model 87

From: pete , - visit me at: http://msn.com

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Jan 4, 2003, 14:10 EST

RE:
i'm also trying to track down info on a Paragon model cs dbl.16ga.conected to baker gun co. & h. d. Folsom arms and Crescent Arms. i finally found my in for from sales@boydboys.com excellent cross reference found mine to cross with Stevens dbl. bl. forearm and stock will fit rite on.try them.les

From: les thayer, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Jan 4, 2003, 14:25 EST

restoration project
Mr. Sullivan I'm looking for someone to restore my great grandfathers dbl. bal. Paragon model CS. all i have is the barrels and full receiver; I've found out that Stevens forearm and butt stock will fit this gun, if you are interested please call me collect at 608-849-7932 thanks much - Les

From: les, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Jan 4, 2003, 14:29 EST

WANTED
i have a Stevens model 125 bolt action single shot 22.when i bought this gun it was missing a rear sight And now i need a rear sight and dovetail for it. I need information on where to get them. I've looked every where on the internet for it and i have not got any information from it.

From: pete, - visit me at: http://msn.com.

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Jan 4, 2003, 14:30 EST

From: pete, - visit me at: http://msn.com

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Jan 4, 2003, 15:02 EST

restoration
i'm looking for someone interested in restoring my great-grandfathers 16ga. dbl. barrel paragon model cs just a wall hanger, but i might like to shot it. all i have is the barrels and a complete receiver. cross reference show that the Stevens wood will match both butt stock and forearm. thanks, Les.

From: les, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Jan 4, 2003, 15:07 EST

Wisconsin gun manufactures
would anyone be able to give me the names of now closed gun man factors in Wisconsin, thanks for you help. Les

From: les- call me collect 608-849-7932, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Jan 4, 2003, 15:52 EST

rear dovetail sight
I have a Model #87 Stevens 22 single shot rifle, and I need some help to locate a rear dovetail and rear sight.

From: George Dotson, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Jan 6, 2003, 02:04 EST

WANTED: western field .22 long rifle stock
I am looking for a stock for my western field .22 S-L-LR. the model number is M842

From: Ivan Reeves, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Jan 7, 2003, 15:19 EST

WANTED: (needed) information and part
I've recently acquired a bolt-action 12 gauge. its missing the bolt/firing pin. i need information on it and any possibilities of where i could get what i need to return it to working condition. any information on it would be appreciated. its a J C Higgins, model # 583.1 i don't know much about guns so any information at all would help me greatly. THANK YOU

From: Justin Thurston, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Jan 11, 2003, 13:01 EST

Wanted: H & R 922
Pistol by the H & R ARMS COMPANY Worchester Mass. USA model: H & R 922

From: d. rather, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Jan 12, 2003, 15:17 EST

INFORMATION WANTED
We have a rifle manufactured by J. Stevens and Co. It is called Little Scout, a 22 l rifle The patent mark says pat.7-2-C7. If you know about this rifle or can help with any information, please send me an e-mail.

From: Richard Stanforth, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Jan 18, 2003, 13:40 EST

WANTED: Remington ZigZag
And other Elliot Derringers. Part to Prestine - priced accordingly.

From: David Fagan, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Jan 20, 2003, 16:28 EST

RE: Bullet Trivia Answer
To understand the answer to your question you need only to understand where a bullet gets its' velocity. A bullets' velocity is created by the expansion of a detonation (burning gun powder). As long as the detonation is trapped behind the bullet its' expansion will increase the bullets velocity. Only after the bullet exits the muzzle does the detonation expand into the atmosphere (i.e. muzzle flash). Therefore the longer the muzzle is, the more time the detonation has to accelerate the projectile (bullet). This is where the term muzzle velocity comes in, because once the projectile exits the muzzle it begins its' deceleration. Keep on shooting!

From: Michael, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Jan 23, 2003, 12:29 EST

I need help; WestPoint model 167
I have a WestPoint Model 167 made by the Stevens arm company. Do not know the year. It was my fathers and was in the flood of 85' in WV. I am currently restoring it and it is missing the end of the choke tube. If you have any info on the year or where I can get parts for it I would be grateful. Thanks, Zach

From: Zachary W. Parker, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Jan 24, 2003, 11:26 EST

Worth anything?
I have a side hammer double sxs W H Hamilton 12 gauge with a Turkish Damascus Belgium barrel. I was looking for more info. Could you help a guy out?

From: sway, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Jan 24, 2003, 18:54 EST

WARD`S WESTERN FIELD 20GAGE
I HAVE A WARD`S WESTERN FIELD MODEL # 10-SB94-B SELECTED FORGE STEEL PROOF TESTED 20 GAGE 2 3/4 INCH CHAMBER MODEL 94C WHAT IS THE VALUE OF THIS SHOTGUN

From: NICKY LYN, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Jan 26, 2003, 12:50 EST

INFORMATION ON A 10 GAGE T. BARKER SHOTGUN
I AM LOOKING FOR INFO ON A 10 GAGE SIDE BY SIDE WITH TWIN TRIGGERS AND TWIN EXTERNAL HAMMERS. THE SHOTGUN HAS BELGIUM LAMINATED STEEL ENGRAVED ON THE BARREL. THE SIDE PLATE HAS T BARKER AND SMALL REBBITS ENGRAVED ON EACH SIDE. ALL OF THE PARTS HAVE CR17 STAMP ON THEM. ON THE BARREL THERE IS A CROWN OVER A OVAL WITH E.L.G.H. ON THE INSIDE OF THE OVAL. THE BARREL IS 32INCH LONG. LOOKING FOR INFORMATION ON THE GUN. THANKS DANNY

From: DANNY REYNOLDS, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Jan 26, 2003, 17:54 EST

wanted, lever action 12 shotgun
Hello, I need to know if any one can tell me if there is a shot gun that is lever action in 12 gauge and who makes them. This would help me so much. thanks for your time.

From: Lonny David, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Feb 3, 2003, 13:39 EST

Information
I need information on a 20 Gauge Western Field Shot Gun, double barrel, side by side. It was made for Montgomery Wards. Any information would be much appreciated. Thanks.

From: Paul Kelley, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Feb 3, 2003, 14:42 EST

looking for info on a Western Field 30-30
i have a western field 30-30 lever action rifle. it was made for and sold at Montgomery Ward stores. I would like to know when it was made and what it is worth. it is a model M-72. thanks Lee

From: Lee Dyer, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Feb 5, 2003, 21:35 EST

Wanted : A barrel stock & a four stock
would like to buy a barrel stock and a four stock for a Harrington & Richardson 12 gauge shotgun, very old gun, do not know the year. The stock number is A871710.

From: Albert Lilly, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Feb 6, 2003, 15:47 EST

RE: J.Stevens little scout 22 rifle
have from father one 22 single shoot markings as follows J. Stevens Arms Company Chicopee Falls Mass usa Little Scout 22 Long rifle Pat. 14 1/2 July 2 07

From: arthur whiteside, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Feb 6, 2003, 18:39 EST

.410 shotgun information wanted
I need some information regarding a .410 shotgun model number SB, serial number C1157732 Need to know manufacturer, any problems, recalls, etc, please email me directly at ann69@netmcr.com

From: Ann Cunningham, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Feb 6, 2003, 21:00 EST

WANTED: VALUE OF A WINCHESTER 25-20
I would like to know the value of a Winchester 25-20, Model 53. This gun is in good condition and well taken care of.

From: Beth, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Feb 7, 2003, 19:50 EST

FOR SALE:1855 COLT REVOLVER AND CIVIL WAR PHOTO ALBUMS
HELLO...MY NAME IS BRAD JONES AND I LIVE IN SEARSPORT MAINE. TONIGHT I BOUGHT AN OLD COLT REVOLVER IN GOOD CONDITION. I WAS TOLD IT WAS MILITARY CARTOUCHE ON THE GRIP AND ALL THE NUMBERS MATCH THE PAT. DATE IS 1855.THE LOWER PART OF THE FRAME LOOKS BRASS...IT HAS PITTING BUT THE BARREL AND METAL PARTS SEEMS IN GOOD CONDITION...I BOUGHT IT IN A GROUP OF ITEMS WITH 3 PHOTO ALBUMS WITH TIN TYPE PHOTOS MOST OF WHICH ARE FAMILY BUT A COUPLE ARE OF CIVIL WAR PEOPLE...IN WHAT APPEARS TO BE UNIFORMS...THESE ITEMS ALL CAME FROM A MAINE FAMILY. THE GUN IT SAID TO HAVE BELONGED TO ONE OF THE MEN IN THE PHOTOS...I WAS TOLD HE WAS A CALVARY SOLDIER IN THE CIVIL WAR AND THAT THIS WAS HIS FIREARM...I HAVE THE FAMILY NAME IN WITH THE PHOTOS IDENTIFYING THE PEOPLE IN THE PHOTOS...I WAS WONDERING IF YOU KNOW OF ANYONE WHO WOULD POSSIBLY BE INTERESTED IN SOMETHING LIKE WHAT I HAVE DESCRIBED ??I DON'T COLLECT GUNS ANYMORE AND NEVER HAD ANY OLD GUNS...ITS VERY NICE AND THE PHOTOS ARE VERY INTERESTING BUT NOT MY THING THESE DAYS...SO IF YOU KNOW OF AN AUCTION SITE THAT WILL ALLOW ME TO SELL IT. WOULD YOU KINDLY SEND THE ADDRESS TO ME... THANKS BRAD JONES

From: BRAD JONES, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Feb 7, 2003, 23:29 EST

RE:
there are some commemoratives that i am looking for but it is hard to figure out with out prices or list Thanks Dan

From: daniel dembowiak, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Feb 8, 2003, 10:50 EST

hercules1929 shotgun
wards id. breakaway 32" single barrel. proof tested 12 gauge marked on barrel. is this a 12gauge what yr where they made in. serial #C 308C7. inherited from neighbors grandfather. any info

From: thomas g herpin, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Feb 9, 2003, 11:33 EST

Wanted : Info. on .22 pistol (9 shot)
Would like any information about a H&R Arms Co. handgun. Is a model 922 H&R Arms Co. Made Worcester, Mass. serial # N5862T. Thanks

From: Terry Frick, - visit me at: Windstar02@msn.com

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Feb 10, 2003, 19:59 EST

info needed on mossburg rifle
i have just acquired a 42mb Mossberg .22 and was wondering if anyone knows anything about them

From: steve, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Feb 10, 2003, 20:06 EST

A Little Help
Does any one have any info. on H&R Inc. (pistol manufacturer) of Worcester Mass. USA ? Thanks.

From: George Walker, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Feb 10, 2003, 22:13 EST

item wanted
need clip for 12ga Stevens/ Savage bolt action model 58,holds 2& 3/4" shells.{3 shot clip}

From: andrew guthrie, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Feb 11, 2003, 20:49 EST

wanted
Forearm for Winchester mod. 20 410 ga. single shot shotgun trigger guard for S & W No.3 44 cal revolver

From: robert mattson, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Feb 16, 2003, 18:16 EST

H & R Arms Company 922
I have a 9 shot 22, Mod. 922, 6 inch barrel H&R Revolver. Any ideas on age and value. Looks pretty clean and original plastic grips.

From: Daryl, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Feb 16, 2003, 18:24 EST

RE: H & R Shot
I too have a 922 # K37343. It belongs to my wife but I haven't shot yet. It's old but I'm not sure of the age.

From: Daryl, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Feb 19, 2003, 08:40 EST

For sale BAR / THOMPSON
FOR SALE M1918-A1 BAR...ALSO THOMPSON SUBMACHINE GUN

From: JOHN EDWARDS, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Feb 19, 2003, 17:27 EST

need info on Remington shotgun
Damascus side by side double barrel 2 triggers serial# 103279 also has #7800 on it. we think it is a 10 gage would like to know year made and any other info you have.

From: louie sater, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Feb 19, 2003, 20:09 EST

RE:
I also have the same gun, any info you could pass along would be of great interest thank you. I have a 25 stevens

From: Clardon Nickerson, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Feb 20, 2003, 16:23 EST

RE: T. Barker Double Barrel Shotgun
I recently purchased the same double barrel shotgun. "T. Barker" engraved hunter and rabbit on left side, hunting dog on the right side. On top between the barrels there is "Belgium Blued Steel". Underneath the barrels at the break down, there are symbols stamped on both barrels. The internet shows possible manufacturers; Crescent, H & D Folsom Arms Co., Iver Johnson, or The Baker, Hamilton and Pacific Company. I have no other info. Please respond if you have some.

From: Dean Hillis, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Feb 21, 2003, 23:09 EST

J.STEVENS SPRINGFIELD 22 CAL.SINGLE SHOT MODEL 15
I'M TRYING TO FIND OUT WHEN THIS GUN WAS MADE AND HOW MUCH THIS GUN IS VALUE IS IF YOU CAN HELP ME EMAIL AT TIFFANYCOLEY@YAHOO.COM

From: TIFFANY, - visit me at:

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Feb 22, 2003, 16:50 EST

RE: Stevens/Savage Arms 410. Model 94C
I also have a Stevens/Savage Arms 410. Model #94C shotgun. I would like to know when this gun was manufactured. It was a gift from my late grandparents that really means a lot to me. My granmother used it for squirrel hunting. It would be nice to know this info so that I can accurately depict the history whenever I talk about one of my most cherished possessions.

From: Tim, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Feb 23, 2003, 07:26 EST

Wanted
Stevens 10 gauge double barrel shotgun. Collectors quality desired.

From: Jim, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Feb 23, 2003, 22:44 EST

PARKER 12GAUGE
I JUST RECEIVED A 12 GAUGE DOUBLE PARKER FROM MY GRANDFATHERS ESTATE. DON'T KNOW MUCH ABOUT THE GUN. WOULD LIKE SOME INFO ON THE GRADE. SERIAL #653. HEAVY ENGRAVING OF GAME BIRD SCENES ON BOTH SIDES. FANCY SCROLL WORK THROUGHOUT. BARRELS LOOK TO BE DAMASCUS. IT IS A 12 GAUGE. IT LOOKS TO BE IN 80% OR BETTER CONDITION. WOULD LIKE TO KNOW THE GRADE AND VALUE.

From: TONY APANASEWICZ, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Feb 24, 2003, 14:18 EST

RE: newbie needs info
If you get any info on the shotgun, could you pass it on to me? I have the same type of gun. Thanks.

From: wanda johnson, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]

Posting of Feb 27, 2003, 18:32 EST

RE: 922 H&R Arms Co. Worchester , Mass serial #N5862T
I have one of these handguns, model 922, serial # N5862T. H & R Arms Company, Worchester Mass. Is there any information at all you can give me on this handgun.

From: Terry Frick, - visit me at: http://

Notify:
[Reply to Message] [Add New Message] [Top of Page]