(Post Your Wishes On The Radios Main Page)
WANTED:
Jan 20, 2003 - 13:37 - From: - cecnews1@netzero.net
Description of Radios or parts Wanted: IF you have in stock send price
for ea.
Description of Radios or parts Wanted: I need the battery box (with
wires and plug) for a Zenith Trans Oceanic 3000-1.
Description of Radios or parts Wanted: I need a tube for an early
1900's Stewart Warner Console Radio.[coronado]printed on tube[5y3G]no. on tube.
Description of Radios or parts Wanted: Any 1938 Zenith 12-tube
cabinet, any condition, console or table model. I have a restorable chassis.
Description of Radios or parts Wanted: Hi - I'm Steve in Maple Valley.
I just got this radio: http://www.stjohncable.com/~sjjoos/sparton_radio.htm and
wondering if you can help identify it. It only has one number on the chasis:
"model 6-37". Wondering if you can help. Thanks! Steve N4MRN
Description of Radios or parts Wanted: This is a console (made,I
believe, about 1929) It needs a power transformer Part No 24422. Chassis No. is
24420X
Description of Radios or parts Wanted: can you work on it
Description of Radios or parts Wanted: aLL ACCESSIORIES OF HF,VHF,UHF
Description of Radios or parts Wanted: aLL ACCESSIORIES OF HF,VHF,UHF
Description of Radios or parts Wanted: I dont know the model .It is a
table model with 4 knobs .It is white in color it is painted .
Description of Radios or parts Wanted: Want to buy. A good condition
original or restored Zenith 12-a-58.
Description of Radios or parts Wanted: I am restoring a Philco 46-350
and need to locate a carrying strap. These were on the top of the radio and I
believe made of leather. Any help is appreciated! Scott
Description of Radios or parts Wanted: Another eBay shipping
catastrophe! I have a 1949 Coronado Model 94RA1-43-85 and its case is smashed
something bad. I need to find a donor body for my chassis. Any assistance would
be appreciated. Scott
Description of Radios or parts Wanted: zenith royal 3000,
transistorized of good condition
Description of Radios or parts Wanted: Looking for diagram on how to
restring the dial drive on this model
Description of Radios or parts Wanted: I HAVE A HAJTON RADIO MADE BY
THE HAROLD LIFTON COMPANY MODEL 92=1 AND I AM TRYING TO FIND OUT THE VALUE OF IT
DO YOU HAVE ANY IDEA
Description of Radios or parts Wanted: I am looking for the amplifier
to a Midwest Regal console radio, this is a separate chassis from the receiver.
Also, a pair of tweeter speakers for the same.
Description of Radios or parts Wanted: whole radio for parts to
restore another 1000
Description of Radios or parts Wanted: I need a Battery case in good
conditions.
Description of Radios or parts Wanted: off white w/small edger bergen
/ charlie mccarthy on the front
Description of Radios or parts Wanted: I want to no the price because
i have one to offer !!
Description of Radios or parts Wanted: I am looking for a old console
radio cabinit with some kind of doors on it. I intend to put a newer sterio
system in it. I have a nice stromberg-carlson console radio but I hate to tear
the old radio out of it because it still works. Sid Mayberry Almira, Washington
Description of Radios or parts Wanted: cb radioa old shortwave
receivers
Description of Radios or parts Wanted: I have an old coca cola cooler
radio that needs the tuner knobs. Thanks Matthew Miller Ravensdale Antiques
Ravensdale, Wa 98051
Description of Radios or parts Wanted: Plastic dial for model 53
wooden table radip
Description of Radios or parts Wanted: Looking for a chassis with dial
and tuning mechanism. If you have a parts chassis, or this mechanism and tuning
capacitor, that is what I need to restore my unit. Thank you. Ron
Description of Radios or parts Wanted: this is a radio and also has a
45 record player in it's front panel. radio was made in 1960 and purchased in
1961 in egypt. any info would be appreciated. trying to find a value for this
item. thanks
Description of Radios or parts Wanted: dial light or lamp the whole
asembly
Description of Radios or parts Wanted: old tube type bus band two way
radio
Description of Radios or parts Wanted:
Description of Radios or parts Wanted: shematic diagram
Description of Radios or parts Wanted:
Description of Radios or parts Wanted:
Description of Radios or parts Wanted: both in working condition
anyone interested jeannie
Description of Radios or parts Wanted: Octogonal-shaped knob one inch
across with 1/4 inch diameter hole at back to fit into the metal shaft. Knob is
made out of walnut.
Description of Radios or parts Wanted: mode565
Description of Radios or parts Wanted: I would like to buy hammarlund
sp 600 reciver in any kind of shape to restore or use for parts please EM me
will also pay shiping and handeling Thanks Jimmie Wight
Description of Radios or parts Wanted: Need the 28 MHz 21 MHz
oscillator coil. This coil has two internal slugs, one for tuning 28 MHz and the
other for tuning 21 MHz band.
Description of Radios or parts Wanted: admiral combination radio
phonograph
Description of Radios or parts Wanted:
Description of Radios or parts Wanted: Looking for a dail face and
knobs
Description of Radios or parts Wanted: Need knobs
Description of Radios or parts Wanted: I need the plate on top of the
tuning condenser,three small tube shields and the bottom plate of the radio.
thanks Jim Wight WB5AXJ
Description of Radios or parts Wanted:
Description of Radios or parts Wanted:
Description of Radios or parts Wanted: console
Description of Radios or parts Wanted: I have an old Washington TRF
receiver. I am looking for a schematic on this radio, as I would like to restore
it to working condition.
Description of Radios or parts Wanted: wanted; REL precedent mono FM
tuner and/or related schematic, service info. dead or alive!
Description of Radios or parts Wanted:
Description of Radios or parts Wanted:
Description of Radios or parts Wanted: Looking for a good home for it.
Description of Radios or parts Wanted: Meter:100 Microamp. Stock
No.209592
Description of Radios or parts Wanted: I am seeking wave magnets from
the 7G605 Transoceanic, sometimes called the Clipper, or the Bomber. This set
came with two, one for shortwave, and one for standard broadcast.
Description of Radios or parts Wanted: Wanted - Cabinet front cover
panel for a Zenith T/O 3000-1. I need only the upper half which is brushed
aluminum and has a small Zenith emblem on it. I will buy the complete front
panel if need be. I would like one that is not scratched or the brushed aluminum
bubbling. Thanks.
Description of Radios or parts Wanted: Need the last (last if tube to
detector) IF transformer for my S-85. It is a "K-tran style" can held in place
with a clip.
Description of Radios or parts Wanted: Yes, I'm looking for a 1935
wood cabinet table radio that was made by Coronado of LA California. The model
No. is 686. It has an ovel black dile on the right side and has four wood knobs.
If you have this radio, or know some one that does, one in good condition,
please let me know. Thank you. Rob Smith
Description of Radios or parts Wanted: I need the Bezel for a
Farnsworth Model BT63 radio. Will buy a junker if the bezel is intact. Thanks.
Ron Manning, San Antonio, TX
Description of Radios or parts Wanted:
Description of Radios or parts Wanted: Im looking for glasses for the
phiclo radiobar thanks ron p.s if you can tell me any other sites to look on
Description of Radios or parts Wanted: WANTED: Philco 52-548 radio
Description of Radios or parts Wanted: F500B-08 526-9007-000 F500B-31
526-9008-000 F500B-60 526-9009-000 F500B-14 526-9030-000 These are Collins
filters for the 51J-4 receiver
Description of Radios or parts Wanted:
Description of Radios or parts Wanted: Hi.i need the cabinet,crystal
dial and knobs dewald a 501. Thanks. Fernando.
Description of Radios or parts Wanted: Need speaker for S-20 receiver
Description of Radios or parts Wanted: Need the Tone knob (1-9 all 360
degrees) Need the cover for the tuninig condensor enclosure. This one has four
indentations for clips. No screw holes. There are several varieties throughout
the model line but I need the one with the indentations.
Description of Radios or parts Wanted: Looking for the dark wood model
(not the blonde one). Need it in excellent or better condition. Full or partial
restoration is fine as long as it looks good and is in complete working order.
It is intended as a gift for someone with no electronics backround so we want to
be able to plug it in, turn it on and sit back and listen. Appreciate any info.
Description of Radios or parts Wanted: Need the phonograph for a 1942
RCA Anniversary edition Radio/ Phonograph
Description of Radios or parts Wanted: I need the upper door, zenith
part number S-58124 and the AC/DC Adapter, zenith part number S-64352 Thanks for
help. John Shepherd, CAPT USN(RET) 703-671-1789
Description of Radios or parts Wanted: I need the upper section of the
front door assembly, and the 120VAC adapter. Many thanks for any help. John
Shepherd, USN(Ret)
Description of Radios or parts Wanted: floor model flat top 7 knob
Description of Radios or parts Wanted: Blaupunkt Arizona/ Torino
Radiogram. Requires turntable motor or turntable
Description of Radios or parts Wanted:
Description of Radios or parts Wanted: Looking for the dials for the
hallicrafters S38 SW radio mainly the tuning dials thanks jim
http://sabellastudios.com
Description of Radios or parts Wanted: I need some knobs (most of
them, actually). Please, let me know if you can help me. These receivers are not
common in Spain and I would like to restore it. Thanks!
Description of Radios or parts Wanted:
Description of Radios or parts Wanted:
Description of Radios or parts Wanted: The dial is not lit...so I
assume I need a bulb. Everything else works great. I even have the original
operating guide book. Thanks Lee Smith
Description of Radios or parts Wanted: Replacemenment dgital clock
Description of Radios or parts Wanted:
Description of Radios or parts Wanted: Catalin dial surround &
grille (1 piece) in good condition. Also, electrolytic capacitors/filter caps
common to antique radios.
Description of Radios or parts Wanted: I am restoring a Bendix
Radio/phono model 676 D - the speaker is missing. I am not sure looking at the
schematic whether or not a voice coil is needed. Someone cut the wires from the
transformer T-5. Are you familiar with this type of radio and speaker assembly,
and if you are do you have a replacement speaker? I believe the speaker was a
Permanent magnet type from the schematic.
Description of Radios or parts Wanted: Philco 38-4 uses a sort of
clock winding shaped key to set stations, not sure exactly what it looks like,
would like one or info to make one. Tnx Mike K4QET mrutkaus@visuallink.com
Description of Radios or parts Wanted: 1948 Westinghouse am/fm (first
year Fm came out) this is a floor model H164/H166/H167
Description of Radios or parts Wanted: I would like to purchsae the
radio.
Description of Radios or parts Wanted: i 've attempting restoration on
a grundig radio shortwave and would like any information you can possibly give
as i'd like to undertake this project as possible hobby.
Description of Radios or parts Wanted: WANTED ANY OF THE FOLLOWING
RADIO'S PHILCO,ATWATERKENT,ZENITH,RCA,FADA'S, RCA-RADIOLA/ELECTROLA'S CONSOLES
W/H PHONOGRAPHS&CHANGERS CAPEHART(PREWAR)W/H/FLIP CHANGERS,OR ANY OTHER
INTERESTING RADIO. SPECIAL WANTS AK.MODEL 75. ZENITH MODEL 75.PHILCO MODEL
38-690 PHILCO MODEL 38-3-3PC RADIO PHONO.COLUMBIA ELECTROLAS MODEL 920 MODEL
940,980 RCA MODEL D-22 ZENITH MODEL 40A,ZENITH PHONO,RADIO CONSOLES. ZENITH
CONSOLE'S W/H ROBOT DIALS,OR HIGH TUBE COUNT OR ANY OF THE STRATOSPHERES.
Description of Radios or parts Wanted: Variometer or Varicoupler
Atwater Kent style or similar. Atwater Kent horn speaker Model H or similar.
Also early breadboard radios complete or not. Send E-Mail /description and
price. thanks!
Description of Radios or parts Wanted:
Description of Radios or parts Wanted: Have a fada 652 cabinet. Need a
chassis to fill it. Thanks!
Description of Radios or parts Wanted: The Elektra radio I am looking
for has a plastic grill and say Elektra on the right side top.I can send a photo
of the radio if needed.
Description of Radios or parts Wanted: I'm looking for some vacuum
tubes and testers. Please e-mail vac_tubes@hotmail.com if you have any for sale.
Can pick up locally.
Description of Radios or parts Wanted: I am looking for schematics for
1935 Crosley radio. Preferably with componant values i.e. resistors, caps,
inductors etc. Or how about a good website? Thanks in advance. Mike (the radio
nut).
Description of Radios or parts Wanted: blue tip antenna (complete)
Description of Radios or parts Wanted: I am looking for a good
schmatic including the power supply schmatic for a galaxy saturn turbo,or Eagle
5000, or the older RCI 2990. I need the power suppy schmatic the most. the one I
have is unreadable. Thank you, Ron
Description of Radios or parts Wanted: I am refurbishing an 1950's RCA
A-78 console, and wish to compleatly refurbish both the 45 RPM turntable and the
78rpm turntble. Any parts or information would be helpfull as this is my first
project. Thanks
Description of Radios or parts Wanted: Looking for the follwoing model
Sears Wayfarer AM/FM/SW mutli-band radio receiver . Any help? Bob
Description of Radios or parts Wanted: dial escutcheon
Description of Radios or parts Wanted: I am looking for the pointer
and glass cover.... any ideas would be greatly apreciated.
Description of Radios or parts Wanted: I have a table top "LAMP" radio
(a radio built into the base of a lamp). One side of the cover is damaged and I
any looking for a repacement. Do you know anyone who may have one of these. I
will send you the model number tomorrow.
Description of Radios or parts Wanted:
Description of Radios or parts Wanted:
Description of Radios or parts Wanted: I need the plastic bezel that
goes around the glass tuner and pushbuttons, also the pushbuttons
Description of Radios or parts Wanted:
Description of Radios or parts Wanted: Serial number 144887 Traveler
Radio...need the celuloid face plate.
Description of Radios or parts Wanted:
Description of Radios or parts Wanted:
Description of Radios or parts Wanted:
Description of Radios or parts Wanted: one of the four small control
knobs around the dial
Description of Radios or parts Wanted: looking for 2 black or dark
brown knobs w/round tops w/ "z" for 6D510 zenith radio. Thanks!
Description of Radios or parts Wanted: Need the specific Wave Magnet
antenna for a recently acquired Trans Oceanic G-500. Also need the round
thumbscrews to attach it to the radio.
Description of Radios or parts Wanted:
Description of Radios or parts Wanted: Anyone "sitting" on the wiring
diagram which includes component data and willing to share it ?
Description of Radios or parts Wanted: ABOVE ITEM FOR SALE. make me an
offer
Description of Radios or parts Wanted: Dial face with BC & SW
numbering, also push-buttons
Description of Radios or parts Wanted: Tapped Resistance Unit for 1927
radiola 17
Description of Radios or parts Wanted: I'm looking for a light buld
for display window. The number is G. E. 259 or equivalent.,6.3 volt
Description of Radios or parts Wanted:
Description of Radios or parts Wanted: I want the complete working
radio with battery operation at a reasonable price.
Description of Radios or parts Wanted: I have restored the cabinet but
I need a decal for the front that says: RCA Victor The decal should be approx.
1/4" high by 2" long. If don't have one can you suggest a contact? Thanks, Bob
Mutch
Description of Radios or parts Wanted:
Description of Radios or parts Wanted:
Description of Radios or parts Wanted:
Description of Radios or parts Wanted: I have a larger nice Baldwin
driver to be considered in a swap. Also need metal bottom cover for UZ1325.
Thanks
Description of Radios or parts Wanted: admiral table top radio and
record player
Description of Radios or parts Wanted: Hello I need a replacement
VIBRATOR for the radio in my 1947 DeSoto. Mallory Type 859, 6 volt. Can you
supply these? Does anyone have cross reference list? PLEASE help. Thanks
Description of Radios or parts Wanted: looking for a remote control
for thr knight reel to reel, part #96R636
Description of Radios or parts Wanted: IC that drives speaker for cr-9
crosley radio
Description of Radios or parts Wanted: Main volume control, 1 MEG ohm
value, Original made by centralab. all resistive material is worn off this
control, can anyone replace or refurbish original? Thanks
Description of Radios or parts Wanted: i have a console victrola/radio
with original needles original oil in it's original case etc. if you could let
me know if anyone is interested, please email me this is at least 100 yrs. old.
Description of Radios or parts Wanted: i have a console victrola/radio
with original needles original oil in it's original case etc. if you could let
me know if anyone is interested, please email me this is at least 100 yrs. old.
Description of Radios or parts Wanted: near mint condition wanted,
including manuals and brochures......
Description of Radios or parts Wanted:
Description of Radios or parts Wanted:
Description of Radios or parts Wanted:
Description of Radios or parts Wanted: PLEASE HELP!!! I REALLY
MESSED-UP AND BROKE THE INNER DIAL GLASS IN HALF...IT'S THE ONE WITH THE
PRINTING OF THE STATIONS & IT'S PAINTED IN REVERSE....MULTI-COLORED WHITE,
GREEN, YELLOW & A DARK PURPLISH, EACH FOR A DIFFERENT BAND....WILLING TO
BEG-BARROW AND DO A SONG-&-DANCE FOR THIS ITEM....WILL PAY TOP DOLLAR IF YOU
HAVE IT, THANX.
Description of Radios or parts Wanted:
Description of Radios or parts Wanted: Metal push-in fastener used to
attach the fiberboard cover over the open back of a Philco Transitone table
radio.
Description of Radios or parts Wanted: schematic for radio chasis
model R20413CA, manufactured 09/65.
Description of Radios or parts Wanted: For a Philco Cathedral 37-84
radio. Thank You
Description of Radios or parts Wanted:
Description of Radios or parts Wanted: Clean and usable chassis to fit
1936 Zenith 6S27, 6S30,6S52 models. Chassis # 5619
Description of Radios or parts Wanted:
Description of Radios or parts Wanted: Good clean (but doesn't have to
work) Zenith chassis type 1202A, this is a 12 tube chassis as used in the
following models: 12A57, 12A57-L, 12A58 or 12A58L. Thankyou.
Description of Radios or parts Wanted: I need a good dial glass, and a
fixable or good cabinet for this big Granco I just got with major damage.
04/25/2004
Description of Radios or parts Wanted: HI LOOKING FOR A ZENITH
12-S-232 TO FINISH PART OF MY COLLECTION.IF YOU HAVE ONE OR KNOW SOME ONE WHO
HAS ONE PLEASE E-MAIL ME THANKS SO MUTCH......ask for John
Description of Radios or parts Wanted:
Description of Radios or parts Wanted: glass for the clock front.
thanks
Description of Radios or parts Wanted: complete chassis ( no cabinet)
with tubes if possible
Description of Radios or parts Wanted: Batteries for Maxon CP-0520
Description of Radios or parts Wanted:
Description of Radios or parts Wanted: I am looking for a cabinet only
from a thirties or fourties ventage floor console radio. Philco, Zenith, Wards
or what ever, as long as it is in ok condition. I live in Lynnwood so p/u is
easy.
Description of Radios or parts Wanted: You have a Zenith wood cabinet
boomerang dial tube radio on your website for sale for $85.00. The picture of
the radio looks like a radio I own, Model 6D029. I have been trying to find out
what year that model was made. Could you please help me. Thank you Sheri
Description of Radios or parts Wanted:
Description of Radios or parts Wanted: Have old chassis to far gone
for parts only. Need restorable chassis that is restorable.
Description of Radios or parts Wanted:
Description of Radios or parts Wanted:
Description of Radios or parts Wanted: In 1972, Laf.came out with this
particular model CB radio.I might be interested for a reasonable amount to
purchase this particular 5 watts, tube type, Radio. You can e mail me at
Stevethehat23@hotmail.com
Description of Radios or parts Wanted: schematics and battery for
power supply
Description of Radios or parts Wanted: I need the station pointer for
a Philco console 41-295 or 41-300.
Description of Radios or parts Wanted:
Description of Radios or parts Wanted: I have recently acquired 2
skyrover console floor models, one is listed as the "super meterodyne model",
the other has the brass plate on that says "Improved Sky Rover". Can anyone tell
me where I might find info on these units?? The only things I've found so far
are either "table top units" or "bakelite units...Any info would be greatly
appreciated, I'm also looking for restoration info, I want them to be done
correctly so it won't interfere with the value. Also If you send me an e-mail
address I could scan pictures of the units.. Thank you for any help you can give
me Daniel R Warmus
Description of Radios or parts Wanted: I have recently acquired 2
skyrover console floor models, one is listed as the "super meterodyne model",
the other has the brass plate on that says "Improved Sky Rover". Can anyone tell
me where I might find info on these units?? The only things I've found so far
are either "table top units" or "bakelite units...Any info would be greatly
appreciated, I'm also looking for restoration info, I want them to be done
correctly so it won't interfere with the value. Also If you send me an e-mail
address I could scan pictures of the units.. Thank you for any help you can give
me Daniel R Warmus
Description of Radios or parts Wanted: Need knobs for HQ-180 and HXL-1
Amp....also looking for front panels for any HQ 100,110,145,170 o1r 180...also
chassis covers
Description of Radios or parts Wanted:
Description of Radios or parts Wanted: brown portable-it's value?
Description of Radios or parts Wanted: I am looking for a "Bluebird"
radio, designed by Walter Dorwin Teague. Thanks!
Description of Radios or parts Wanted: I need to find a power supply
for a 1926 Majestic radio console.
Description of Radios or parts Wanted:
Description of Radios or parts Wanted: Want complete Buddy L CB Radio,
these were popular here in the late 60's. 23 channel base set with a 2E26 in the
final.
Description of Radios or parts Wanted: 49 909 philco wafer switch
Description of Radios or parts Wanted: Need tubes, caps, and full spec
for battery eliminator. Thanx
Description of Radios or parts Wanted:
Description of Radios or parts Wanted:
Description of Radios or parts Wanted: I need a AC power cord. George
Description of Radios or parts Wanted:
Description of Radios or parts Wanted: I am looking for a transformer
for a philco model 38 - 12. I think this may be an oil filled transtormer. Not
sure.
Description of Radios or parts Wanted: I'm looking for parts for 1
radio and possibly a complete chassis and speaker that I can scavange parts from
for another. First radio is a 1942 Zenith 7S685. I need the oscillator coil for
that one. The original part number was S9659. It's a 6 terminal coil. The 2nd
radio what I'm looking for is a scrap chassis.That one is for a 12 tube Zenith
about 1939. This radio has the 8 preset station assembly and the on/off as a
separate switch mounted to the right, along with the 6 tone pull slides.This
radio uses the "hook" type buttons. I need the preset station assembly, along
with the IF transformers and under the chassis coils. I also need the 12"
speaker. This radio was stored in a wet barn so has a lot of surface rust plus
the rodents devourd the coils and the speaker cone. If you don't have a complete
chassis I'm willing to take whatever parts I can get. George Better Audio &
TV Elmhurst, Illinois
Description of Radios or parts Wanted: I'm looking for a tube to
replace burn out tubes on my old zenith radio. the tubes I need is 1L6,1U4/5 and
3V4. If you have these parts please let me know and also the price. Thank you
and hope to hear from you.
Description of Radios or parts Wanted: Power supply for the Zenith
Royal 3000-1 Power supply that plugs into wall socket.
Description of Radios or parts Wanted: I want the catalog from you .
Description of Radios or parts Wanted: I AM LOOKING FOR A SPEAKER FOR
MY SENTINEL CONSOLE RADIO. IT IS 8 INCHES IN DIAMETER HAS 3 WIRES RUNNING TO A 4
PIN ROUND PLUG. TWO OF THE PINS ARE LARGER THAN THE OTHER TWO. THE SENTINEL
PART# IS 1353. THANKS, DAVID
Description of Radios or parts Wanted: these usually clamped onto the
handle bars
Description of Radios or parts Wanted:
Description of Radios or parts Wanted:
Description of Radios or parts Wanted: Philo Model 41-605. Need
speaker part number 36-1515
Description of Radios or parts Wanted: Dial face for 12H670 (
SW/BC/FM). Would appreciate any links to replacement type dial overlay as well.
Description of Radios or parts Wanted:
Description of Radios or parts Wanted: glowtube in general
Description of Radios or parts Wanted: I have a Sparton (sp?) model 49
radio cabinet which has not radio chassis. I would like to find either a chassis
for that radio, one that would fit and work, or a kit with which to build an AM
tube type radio.
Description of Radios or parts Wanted: I need an antenna for a
Nordmende Globtrotter Sw radio, about 1971
Description of Radios or parts Wanted: I am looking for the
transformer out of this radio.
Description of Radios or parts Wanted: I am looking for the
transformer out of this radio.
Description of Radios or parts Wanted: Looking for a nice set of
multiband antenna rf and osc coils in metal cans for a project broadcast
am/shortwave radio.
Description of Radios or parts Wanted: AC power cord and Log book for
the 7000-1
Description of Radios or parts Wanted: I am looking for the Glass Dial
Lens for a Schaub Lorenz Tivoli 300, made in Western Germany around 1961, Also
the Volume Tuneing Knob for the same radio. Would you have them or know of
someone who deals in these parts of parts for German radios of that era? Many
Thanks Dennis
Description of Radios or parts Wanted:
Description of Radios or parts Wanted: The radio is for a 1939
STUDEBAKER-CHAMPION
Description of Radios or parts Wanted: I need a main dial for a
Hallicrafters SX-28 Superskyrider receiver.
Description of Radios or parts Wanted: amp
Description of Radios or parts Wanted:
Description of Radios or parts Wanted: I need the plastic faceplate
for a 1939 GE Model H-87. I don't care if it's used or reproduction. It says
Gebneral Electric on the top and has the channels listed on it wih a selection
for channels B, C, and D. Also has two side cut-outs for the two dials.
Description of Radios or parts Wanted: ZENITH TRANSOCEANIC RADIO ROYAL
7000-1 Need replacement antenna for this model.
Description of Radios or parts Wanted: I am restoring a S-38 and need
the circle "h" logo that appears on the from of the cabinet.
Description of Radios or parts Wanted: I am looking for a maual or
other service information for the Sentinel 275-T farm radio. Any help would be
appreciated. Thanks. Bob
Description of Radios or parts Wanted: Need a plastic dial cover for
Zenith 8G005 Trans Oceanic.
Description of Radios or parts Wanted:
Description of Radios or parts Wanted: I am looking for the dial, the
metal and (I belive?) the glass that goes over the dial too for this model.
Description of Radios or parts Wanted: wanted information on Stromberg
Carlson Model 652 console radio.
Description of Radios or parts Wanted: Zenith 49AG403 Speaker
Description of Radios or parts Wanted: I am looking for a good audio
output transformer for a Hallicrafters SX-28 Superskyrider receiver.This has 6v6
push pull 500-5000 ohm output. tnx Jerry
Description of Radios or parts Wanted: Needing escutcheon,Glass dial
with rubber ends, dial indicator. - All tubes, which there are 7 plus the push
buttons.
Description of Radios or parts Wanted: Looking for original glassware
and bottles for my RadioBar, as well as any advertising literature or catalogs
for the Model 37-620. Thanks, Matt
Description of Radios or parts Wanted: A 3 tier coil from a 12-A-58
Zenith console. It is 2 inches big , the topmcoil being the biggest, the 2nd
being med and the 3rd being the smallest. It has 4 connectio prongs. thank you
Drew
Description of Radios or parts Wanted: on front of radio on bottom
above buttons,just below word zenith a BRASS PLATE ,like a acess plate,about one
half inch wide,4 in. long.small screw on each end. thank you
mikecolleen77@yahoo.com
Description of Radios or parts Wanted: NEED POWER CORD AND MIKE FOR
THIS, WOULD LIKE TO TRY AND GET IT UP AND RUNNING, THANKS
Description of Radios or parts Wanted: need the front door pulls x2 on
wood console cabinet. Pulls are the same on the 1929 RCA RE-57 and the 1929
GRAYBAR console, both with doors.
Description of Radios or parts Wanted: Looking for a main power
transformer- has 12 leads, almost square. Some chassis # off unit- HFX2516-11,
29387, X2510-17. Rated at 165 VA. Thanks; Bob Brown
Description of Radios or parts Wanted: Bulbs are used for short in
test equipment
Description of Radios or parts Wanted: I need small plastic,
black-and-gold circle nameplate (The music note with "Emerson" on it.)for a
small Emerson model 50B-1. Pleae let me know if anyone has one for sale. Thank
you!!!!
Description of Radios or parts Wanted: case only
Description of Radios or parts Wanted: RCA Q-44 radio wood case only
Description of Radios or parts Wanted:
Description of Radios or parts Wanted: This a a large wooden table
model with 4 knobs, a cat's eye at the top and the speaker to the left with
about 7 horizontal speaker grills. The face dial is octagonal.
Description of Radios or parts Wanted:
Description of Radios or parts Wanted: Need knobs, need antenna input
transformer. Mounted on top of chassis.
Description of Radios or parts Wanted: FM-1266DS 9/66
Description of Radios or parts Wanted: cpu board for a Rci 2990 or
galaxy 2527 model # DPT295042Z other wise i will be selling radio for parts as
thats all thats wrong with it.. Thx
Description of Radios or parts Wanted: Shematic for Royal-7000
Trans-Oceanic Radio
Description of Radios or parts Wanted: I need the mahogany case for a
Crosley Model XJ battery radio.
Description of Radios or parts Wanted: I NEED ONE OF THE THREE IRON
CORE INTERSTAGE XFORMERS USED IN THIS SET.APPROX 1.75K PRIMARY, 4.5K SECONDARY.
IT IS MOUNTED WITH TWO SCREWS ON APPROX 2 5/8 CENTERS.
Description of Radios or parts Wanted: 6" round bezel (brass?) like
for a 6s238 or equivalent
Description of Radios or parts Wanted: looking for rdio and speaker
for a 1939 STUDEBAKER, car model-CHAMPION THANKS
Description of Radios or parts Wanted: Need the 3 Clear Plastic
Battery Tubes & Owners Manual.
Description of Radios or parts Wanted: spare tube holder
Description of Radios or parts Wanted: Grundig model KS620U audio
output transformer part # 9048-074.07
Description of Radios or parts Wanted: C1213C IC
Description of Radios or parts Wanted: Radio yellow and brown
Description of Radios or parts Wanted: two battery covers for two
radios
Description of Radios or parts Wanted: Hi, Im looking for a good used
or reproduction of a red tuning dial to replace my warped one.Thanks For Any
Help Or Information On Who To Contact. Jim
Description of Radios or parts Wanted:
Description of Radios or parts Wanted:
Description of Radios or parts Wanted: Need 2 radio knobs for a
vintage Stewart Warner radio cabinet. I have only the cabinet, but it is a
beautiful storage piece. There are two holes in front.....knobs do not have to
be for that brand radio. Just want to close up the holes. Thanks for your help.
Description of Radios or parts Wanted: plus a schmatic for the battery
lay out
Description of Radios or parts Wanted: dial cover plate needed for
93br-715a
Description of Radios or parts Wanted: I NEED A DIAL RE-STRINGING
DIAGRAM FOR A GRUNDIG MAJESTIC MODEL 1060U AM/FM/SW RADIO.
Description of Radios or parts Wanted: 50 Blaupunkt multi band
stereo/bar/record player Typ Nr E243237 I'm looking for info, manuals, misc.
small parts. Styless,etc.
Description of Radios or parts Wanted: Any information would be of
help!...I have hit block wall after block wall to find out any information about
this radio that is on my 1933 Cheverolet Master Eagle 2/dr..
Description of Radios or parts Wanted: THE DIAL CORD RE-STRINGING
DIAGRAM THAT I NEED IS FOR THE GRUNDIG MAJESTIC MODEL 3160U RADIO,NOT A "1060u"
AS I HAD STATED IN AN EARLIER MESSAGE(5/16/05). SORRY ABOUT THE TYPO.
Description of Radios or parts Wanted: NEEDED FOR MY 1000. BATTERY
HOLDER(PACK) HOLDS 9 D CELLS. E Mail.. CHARLIEMIKEALFA@YAHOO.COM WITH COST.
THANKS
Description of Radios or parts Wanted: NEED ONE IN THE WORSE WAY(IS
THERE ANY OTHER WAY??) E MAIL CHARLIEMIKEALFA@YAHOO.COM THANKS
Description of Radios or parts Wanted: knobs
Description of Radios or parts Wanted: I am looking for a stylus for a
Bendix 736B Radio/Phonograph.
Description of Radios or parts Wanted: Hi, I need a chassis and
speaker for this radio, part no. K82. Any help, referrals greatly appreciated!!
Description of Radios or parts Wanted: Hi, I need a power supply,
schematics,etc. for this radio. Any referrals, help, etc. greatly appreciated!!
Description of Radios or parts Wanted: Need the front wood grill for
my Philco 70 catherral radio. This will complete my 175 pc radio collection.
Thanks.
Description of Radios or parts Wanted: Need schematic for SANYO 7C-307
aka: CADNICA
Description of Radios or parts Wanted: Im looking for needles for the
phono. and the hand crank that turns the radio tuner. hope you all can help.
Description of Radios or parts Wanted: I am in need of the remote
speaker cabinet for a Philco Model 14 LZX Chairside radio (1933). Please call
434-251-6826 or email. THANKS for your help! Charlie
Description of Radios or parts Wanted: I am looking for the round
black dial and the control pushbuttons for my radio cabinet (Zenith 11S474 Model
1940)
Description of Radios or parts Wanted: for ZENITH 500H transistor
radio (is 5K min w/ off-on switch)
Description of Radios or parts Wanted: NEED SCHEMATIC for SANYO
TRANSISTOR RADIO model 7C-307 (1965) (mini transistor radio with charger built
in storage case)
Description of Radios or parts Wanted: I'm lookining for a 1948 RCA
Victor console Radio dail glass. I can be reached at boiseintel@hotmail.com.
Thanks
Description of Radios or parts Wanted: I need an S-20 transformer.
Anyone have one for sale? Thanks for any help.
Description of Radios or parts Wanted: The radio is the original
equipment "Sonomatic" radio that was factory installed in 1939 Buicks.
Description of Radios or parts Wanted:
Description of Radios or parts Wanted: Looking for a Philco Model 38-4
radio chassis and speaker. Kevin at boiseintel@hotmail.com
Description of Radios or parts Wanted:
Description of Radios or parts Wanted: Have Console stereo great
condition need to sell
Description of Radios or parts Wanted: sonora tabletop 1940 antenna
Description of Radios or parts Wanted: Audio Output transformer
#32-8120
Description of Radios or parts Wanted: Center large tuning(?) knob for
GE Model 409 table top.
Description of Radios or parts Wanted:
Description of Radios or parts Wanted: I need a good top lid or cover
& a set of legs for a Crosley 21.
Description of Radios or parts Wanted: Need 5-pin connector (sockets)
to connect to input of Rodgers organ S-100 amplifier. Need to purchase aprox. 12
cps. with covers.
Description of Radios or parts Wanted:
Description of Radios or parts Wanted: 1949 standing Philco radio need
4 front knobs
Description of Radios or parts Wanted: Small round button station cll
letter holders that fit on the escutcheon of 4 and 5 tube models R-312, 314,
303, 317 and perhaps other models
Description of Radios or parts Wanted: Looking for a discrimination
coil for a 1946 Philco radio console.
Description of Radios or parts Wanted: I am looking for a
discrimination coil for a 1946 PHILCO console radio. If someone out there has
one or knows of anyone that has one, please e-mail me. Thank you.
Description of Radios or parts Wanted: Any info or circuit diargram to
help me restore it. Wooden cabinet, frame aerial battery portable.
Description of Radios or parts Wanted: Inside metal cover that fited
inside the radio, that had the instruction on how to operate the radio on it.
Also a copy of the schematic for a Eveready Model 1. Bill
Description of Radios or parts Wanted: I am looking for E.H. Scott
console radios, chassis sets, parts, speakers and empty cabinets. Please e-mail
me with discription and price. Thanks! Merle Jones
Description of Radios or parts Wanted: I am restoring a Olson Tuner,
and I need the Glass Tuning Dial with the Frequency's painted on it, the one I
have is broke. Does anyone know where you can get a generic one? I would
appreciate any help...Rick
Description of Radios or parts Wanted: I need one white knob for the
Emerson 511 "Moderne" radio.This knob was also used on the 547A model.
Description of Radios or parts Wanted: I have this radio, but for some
reason it stoped playing, now it just makes ststic. This raido has a lable on a
bottle shape reading, Grand Old Parr; real antique and rare old De Luxe Scotch
Whisky Any information and value would be appreciated. Thanks Doris Day
Description of Radios or parts Wanted: victor radio-electrola model
re-57
Description of Radios or parts Wanted:
Description of Radios or parts Wanted: Looking for metal plate cover
that was inside a Eveready Model 1. On this plate was patent information and
other information on the radio.Do you have one? Bill nanquinn@northnet.org
Description of Radios or parts Wanted: I need a dial and glass also a
pointer thanks George
Description of Radios or parts Wanted:
Description of Radios or parts Wanted: I would like a unrestored radio
of this model number or something very close in design
Description of Radios or parts Wanted: looking for door handle pull of
a 1946-1947 zenith 12H090 console radio phono
Description of Radios or parts Wanted: Looking for an AC adaptor or a
schematic to make an adaptor so I can play the old radio.
Description of Radios or parts Wanted: brown leather handle
Description of Radios or parts Wanted: Zenith Royal 3000-1
Trans-Oceanic I need the chrome telescopic antenna assembly with orange/red
plastic tip on end
Description of Radios or parts Wanted:
Description of Radios or parts Wanted: looking for a speaker and
cabinet for a Philco 89 lzx
Description of Radios or parts Wanted:
Description of Radios or parts Wanted:
Description of Radios or parts Wanted: general coverage Receiver made
1968-1972
Description of Radios or parts Wanted:
Description of Radios or parts Wanted: I am looking for any police
motorcycle radios, American bosch, Rca, Motorola, Link, Avia, Air associates,
any make any year. thanks scott
Description of Radios or parts Wanted: im looking for a back to a
arvin hopalong cassidy radio thank you maybe can direct me to where to look for
one if you dont have one
Description of Radios or parts Wanted: Need dial for FADA mod. 1001.
This is the wood case radio with a slide rule type dial.Will buy junker
Description of Radios or parts Wanted: motorola stereo system with
verbrasonic its solid wood cabinet model. the cabinet unit is about six feet
long. it has two doors left and right, with a large speaker in the middle, and
five speakers on each side. am fm stereo mult prix. turntable. around 1966 to
1969
Description of Radios or parts Wanted: Any Info or paperwork on this
set.No real model number listed anywhere on either master tx or rcvr.Tube
compliment Indicates possible late 30-40's. No visable antenna ?? Just four IF
cans. Very curious piece Indeed.Suspect It was made by another manufacturer and
branded with Radiofone name. Thanks. Jay
Description of Radios or parts Wanted:
Description of Radios or parts Wanted: A well built short wave radio.
Made in Japan in 1968. It has four tubes 6AR5,6AV6,6BA6,6BE6. If you find one
let me know.
Description of Radios or parts Wanted: I am looking for a philco model
38-4 chassis original, I have cabinet and speaker or will consider buying entire
radio. Thanks: George
Description of Radios or parts Wanted:
Description of Radios or parts Wanted: need cabinet parts and both
speakers for a Zenith model 15U270
Description of Radios or parts Wanted: i have a 1969 buick skylark, i
need a working radio for it.if you have pics please send
Description of Radios or parts Wanted: Zenith Micro-Touch 2G Tone Arm
Description of Radios or parts Wanted: Hi..First time visitor to your
site, looks great. I am looking all over for someone that may have some
knowledge on the model numbers that Sonora used. They have prefixes to the
numbers like WDU, WAU, WLRU. I am doing research on the Sonora radio for a
article in Antique Radio Classified and would like to have an understanding of
what these mean. Can you help to shed some light on this? I also need to know
something about an "A" factory in Chicago in 1930-1934 that made Sonora radios.
Do you know anything about this? Appreciate your help. Respectfully Richard
Arnold Lone Grove, Oklahoma
Description of Radios or parts Wanted: Looking for the above-mentioned
Description of Radios or parts Wanted: Galaxy Saturn Turbo 4 sale. No
scratches or handling marks, no box, mic not included. Email offers....
Description of Radios or parts Wanted: I am looking for a chasis and
speaker for this radio.
Description of Radios or parts Wanted:
Description of Radios or parts Wanted: I have a very nice Hopalong
Cassidy radio (black) but the original back is missing and the two knobs on the
front, while made by Arvin, are not correct for this radio. Will pay top dollar
for these missing parts.
Description of Radios or parts Wanted: The front has a plast dial
cover that has its scale stamped into it. It is odd and hard to reproduce. Mine
is cracked. Looking for one that isnt.
Description of Radios or parts Wanted: Any police motorcycle radios,
radio components or manuals, LINK, motorola, GE, RCA, American bosch, air
associates, du-mont etc.
Description of Radios or parts Wanted: ineed all of circuit shematic
Description of Radios or parts Wanted: My grandfather's ZR 3000-1 is
in mint condition, but I am tired of buying batteries. I always wondered why he
didn't buy the adapter. If anybody can part with the antenna transformer kit
part No. S-49339, I'd take that too. Prof. Jim Moore, University of Southern
California
Description of Radios or parts Wanted: I know the where abouts of this
car radio, not sure whatyear but I beleive it to be around 1930's if anyone in
need of this radio. not sure of its condition but looks like all is there, the
dial are cable drivin to radio and speaker.
Description of Radios or parts Wanted: i am looking for a dial scale
for this radio. if any one knows where i can find a good image of the dial scale
please let me know. i am trying to make a new one for a friend becuase his is
faded and portions of the paint on the glass of the scale has flecked out. i am
attempting to do a new one in Corel Draw so any help would be gretly
appreciated. Thanks, in advance, for ANY help given. Anthony Newton Amateur
Radio (HAM)Call Sign J73JAG
Description of Radios or parts Wanted: I need The Antenna Trasformer
for my radio Part # 32-1310 Hope someone out there can help Thanks
Description of Radios or parts Wanted: Top half of the front cover and
the 2 screws!
Description of Radios or parts Wanted:
Description of Radios or parts Wanted: I'm looking for post-1930
Remler table-tops and consoles. I have a lot of very nice radios to trade, as
well as cash. I'm in San Francisco, a member of CHRS.
Description of Radios or parts Wanted:
Description of Radios or parts Wanted: I have just aquired an RCA
Radiola 18 in beautifull condition. I need the RCA 100A to round it off and make
it operational. Bob Lobenstein-WA2AXZ Brooklyn
Description of Radios or parts Wanted: removed for spamming
Description of Radios or parts Wanted:
Description of Radios or parts Wanted: The glass in front of, and used
to protect the face dial broke. it is a raised piece of glass., Is it possible
to replace this. Thanks; George
Description of Radios or parts Wanted: The glass in front of, and used
to protect the face dial broke. it is a raised piece of glass., Is it possible
to replace this. Thanks; George
Description of Radios or parts Wanted: The glass in front of, and used
to protect the face dial broke. it is a raised piece of glass., Is it possible
to replace this. Thanks; George
Description of Radios or parts Wanted: The glass in front of, and used
to protect the face dial broke. it is a raised piece of glass., Is it possible
to replace this. Thanks; George
Description of Radios or parts Wanted: Can you give me any idea where
I may find some info on a Fidelitone A1-MB 80 series floor console?
Description of Radios or parts Wanted: Need tuning knob and tips for
pushbuttons. Thanks.
Description of Radios or parts Wanted: I have a Majestic Model 20 by
Grigsby-Grunow Co. It was bought by my father for his mother in 1929. It still
keeps time has all original tubes. Very good condition. Does this item have any
particular value?
Description of Radios or parts Wanted: Would like to find a Z dial
pointer for a 12-A-57 console radio. Looking for the white Z pointer. Any help
or leads are appreciated. Will pay well. Thanks!
Description of Radios or parts Wanted: this is a vintage sentinel
radio. the glass piece with the stations that could be tuned into broke. it is
clear glass with black and red number/lettering. the word "sentinel" can be
found in the center. the word "broadcast" appears on the side. the words
"kilocycles" appear on each side in red.
Description of Radios or parts Wanted:
Description of Radios or parts Wanted: Hello: I would need the power
transformer and the dial scale for this particular model. Any help that you
could provide would be greatly appreciated. Tom My e-mail: tbaer46@bellsouth.net
Description of Radios or parts Wanted: KLH Model Thirteen stereo
adapter and speaker for KLH Model Eight radio
Description of Radios or parts Wanted: I am looking for the faceplate
bezel and knobs for a GE H-116 radio.I believe the GE H-87 has the same
faceplate bezel and knobs also. Please let me know if you have either for sale.
Description of Radios or parts Wanted: this extension speaker is
driven by 12ax7 and has a tweed face with gold accents. any information would be
greatly appreciated. speaker terminates in single "RCA" male connector.
Description of Radios or parts Wanted: face plate, cloth
Description of Radios or parts Wanted: Looking for one of the 3
smaller knobs, if black, or a complete set, including tuning, in another color.
Will consider buying a complete non-operating radio for parts, if necessary.
E-mail or phone (805) 981-9774.
Description of Radios or parts Wanted: Need a working radio for my
1939 Ford. Please call Rich at 708-567-2393. Thanks.
Description of Radios or parts Wanted:
Description of Radios or parts Wanted: need SERVICE MANUAL in ENGLISH
Language should be same as PHILIPS 90AL990
Description of Radios or parts Wanted: Love the look of the old
Console Radio.. I look at them on ebay all of the time. I live in Kent
Washington. And would love it if you could email me if you find one in this
area,, Thanks Wayde
Description of Radios or parts Wanted: need scematics of the board