Stan built the model at a scale of 1/4 inch to a foot and designed it so the building structure can be placed on the base after the waterwheel, flywheel, roller slitters and furnace and oven are in place. He left roof and sidewall boards off so viewers can see inside the mill. Pebbles for the stonework were gathered from the site at Nonaet Woodlands.
 Front view with furnace at left and oven at right |
 The model is cut away at the east side to show the full height of the waterwheel |
 View inside the mill with building structure removed |
 The headrace through the dam connected to the millrace inside the building |